毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

某大学教学楼钢筋混凝土框架结构设计+CAD图纸

时间:2020-06-20 15:45来源:毕业论文
结构方案中横向框架的结构设计。在确定框架布局之后,先进行了层间荷载代表值的计算,接着利用经验公式求出自震周期,进而按底部剪力法计算水平地震荷载作用下大小,进而求出在

摘要本设计主要进行了结构方案中横向框架的结构设计。在确定框架布局之后,先进行了层间荷载代表值的计算,接着利用经验公式求出自震周期,进而按底部剪力法计算水平地震荷载作用下大小,进而求出在水平荷载作用下的结构内力(弯矩、剪力、轴力)。同样的过程计算风荷载作用下的结构内力。接着计算竖向荷载(恒载及活荷载)作用下的结构内力,找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。其次还进行了结构方案中的楼梯的设计。完成了平台板,梯段板,平台梁等构件的内力和配筋计算及施工图绘制。此外还进行了基础梁和基础的设计,完成了基础的平面布置和配筋计算,并完成了基础的施工图绘制。51296

毕业论文关键词:   框架结构;结构设计;抗震设计:配筋布置

ABSTRACT The design of the main structure of the transverse frame structure design. In determining the distribution framework, the first layer of the member representative value of the load, then using the empirical formula for earthquake cycle, and then at the bottom of the shear horizontal seismic load calculation under size, then calculated the internal force of the structure under the horizontal loads (bending moment, shear, axial force). Calculation of the internal force of the structure under wind load of the same process. Then calculate vertical load (constant load and live load) under the internal forces, to find one or several sets of the most unfavorable combination of internal forces. Select the best safety results of the reinforcement and drawing. The second is the design of the stairs. Completion of the platform boards, boards of the ladder, internal force and reinforcement calculation and construction drawings platform and other components of the beam drawing. In addition, the design of foundation beam and foundation were also completed the layout, foundation and reinforcement calculation, and completed the construction graph drawing.

Keywords: Frame structure; Structural design; Anti-seismic design;Reinforcementlat

目录

第一章 建筑设计说明书

 1. 1设计原始资料.11

第二章 结构计算书

2.1 原始资料..13

2.2 结构选型..14

2.3 框架结构布置及计算简图 ...14

2.4 屋面和楼面板的荷载统计 ...16

2.5 屋盖楼盖设计 .17

2.6  楼梯设计 22

2.7 恒荷载内力计算33

2.8 活荷载内力计算(屋面布活荷载)44

2.9 地震作用力计算52

2.10 内力组合.60

2.11 截面设计.65

2.12 基础设计.79

结论..88

致  谢89

参考文献..90

第一章   建筑设计说明书

1. 1设计原始资料

1.1.1概况

华东某市一大学拟在校园内新建一教学楼,建筑基地如图所示,场地面积为65m×20m,建筑物主要部分南北朝向。

教学楼内房间以教室为主,每班容纳学生50人,每层均设置男女卫生间,装修要求一般标准,耐火等级二级。

 1.1.2 建筑规模与功能要求:

  ⑴建筑规模:

       总建筑面积3000m2~3500m2左右,层数3~4层。

  ⑵功能要求:

    层高:教学用房3.6~3.9m。

    结构型式:采用钢筋混凝土框架结构。

房间组成及使用面积参考指标:

项目 每间面积(m2) 间数 合计(m2)

小教室 63~72 18 1134~1296 某大学教学楼钢筋混凝土框架结构设计+CAD图纸:http://www.youerw.com/gongcheng/lunwen_54885.html

------分隔线----------------------------
推荐内容