毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

某大学肿瘤防治中心二期工程空调通风工程设计

时间:2019-01-12 17:12来源:毕业论文
肿瘤防治中心二期工程空调通风工程设计。主要介绍了该肿瘤中心大楼空调工程的负荷计算、空调方案的确定、设备选型以及防排烟系统设计。针对该医疗建筑的功能要求和特点,医院

摘要本次毕业设计为肿瘤防治中心二期工程空调通风工程设计。主要介绍了该肿瘤中心大楼空调工程的负荷计算、空调方案的确定、设备选型以及防排烟系统设计。针对该医疗建筑的功能要求和特点,医院病房为防止交叉感染,不宜采用全空气系统,病房、办公区等人员活动区采用常规的风机盘管加独立新风系统;放疗设备机房、扫描室和数据中心对环境的温湿度控制要求较高,采用恒温温室空调系统。本设计对大楼通风、排烟和楼梯间加压送风系统进行设计。地下车库采用诱导通风系统,能有效节省地下空间。32626
关键词  风机盘管加独立新风系统  恒温温室空调系统  诱导通风系统   
毕业论文设计说明书外文摘要
Title  The design of air conditioning and ventilation engineering for cancer prevention and control center 2th project    
Abstract
The graduation design for the second phase of cancer prevention and control center for ventilating and air conditioning engineering. The article introduced the building air conditioning load calculation for the project, the determination of air conditioning scheme, equipment selection, and smoke control system design. In the medical building functional requirements and characteristics of the hospital ward to prevent cross infection,  use all air system is unfavorable, ward、office and other personnel activity area using the conventional fans& independent of fresh air system ;Radiation therapy equipment room, scanning room and data center of environmental temperature and humidity control demand is higher, greenhouse air conditioning system with constant temperature. The design of the building ventilation and smoke exhaust and stairwells pressurized air supply system design. The underground garage using inducing ventilation system, can effectively save the underground space.
Keywords  fans& independent of fresh air system   Constant temperature greenhouse air conditioning system   induced ventilation system  
目   次
1  工程概况    1
1.1  设计题目    1
1.2  设计任务和目的    1
1.3  原始资料    1
1.3.1  土建资料    1
1.3.2  气象资料    1
1.3.3  围护结构    2
1.3.4  室内设计参数    3
1.3.5  供回水温度    3
1.3.6  其他相关资料    3
1.4  设计依据    3
2  负荷计算    4
2.1  冷负荷的计算    4
2.1.1  冷负荷的计算方法    4
2.1.2  负荷计算的准备工作    4
2.1.3  空调冷负荷具体计算方法    5
2.2  湿负荷计算    7
2.3  热负荷计算    7
2.3.1  建筑围护结构的基本传热量    8
2.3.2  附加耗热量    8
2.4  房间负荷的计算    9
2.4.1  阅片室冷负荷计算    9
2.4.2  人体散湿量计算    12
2.4.3  阅片室热负荷计算    12
2.4.4  建筑物负荷统计汇总    13
3  设计方案论证    15
3.1  空调系统设计    15
3.2  冷热源选择    16
4  风机盘管加新风系统选型计算    17
4.1  新风量规定    17
4.2  新风负荷的计算    17
4.3  新风机组选型    18 某大学肿瘤防治中心二期工程空调通风工程设计:http://www.youerw.com/gongcheng/lunwen_29319.html
------分隔线----------------------------
推荐内容