毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

STC89C52单片机光开关的光纤型延迟线结构图

时间:2022-01-18 22:21来源:毕业论文
常见的STC89C52型单片机作为处理芯片,来控制继电器电路以完成对迈克尔逊干涉仪的变焦镜头的变焦、调焦、光圈调整等操作。本系统可以使干涉仪在使用过程中免除由于操作者的直接接

摘要本文在分析并比较了国内外常用的激光遥控、蓝牙遥控、无线微波遥控等遥控方式,并在综合考虑了设计难度与制作成本后,设计并制作了基于红外遥控技术的发射与接收电路,并编写了相应的解码程序。采用了常见的STC89C52型单片机作为处理芯片,来控制继电器电路以完成对迈克尔逊干涉仪的变焦镜头的变焦、调焦、光圈调整等操作。本系统可以使干涉仪在使用过程中免除由于操作者的直接接触所带来的人为干扰,从而提高了其测量精度。红外遥控系统的整体框架包括红外发射部分、红外接收部分、单片机中断控制部分、红外解码部分、继电器控制部分。77161

毕业论文关键词  变焦镜头  红外遥控  红外解码  单片机

毕业设计说明书外文摘要

Title  The research of wireless remote control of interferometer zoom lens

AbstractThe frequently used wireless remote control methods of laser, Bluetooth and microwave are analyzed and compared。 With the overall consideration of the design difficulty and the production cost, radiating and receiving circuit based on infrared remote control are designed and fabricated。 And the decoding program is written。 STC89C52 MCU is used as a processing chip to control the relay circuit to achieve zooming, focusing and aperture adjustment of Michelson’s interferometer zoom lens。 Human-caused disturbances, brought by the direct contact of operator, can be avoided during the use of interferometer and then the accuracy of measurement will be improved。 The frameworks of infrared remote control are composed of infrared radiation, infrared reception, interrupt control technology of MCU, decoding of infrared signal and the control of relay。

Keywords  zoom lens  infrared remote control  decoding of infrared remote control  MCU

目   次

1  绪论  1

2  红外遥控系统的硬件设计  3

2。1  系统总体设计概要  3

2。2  单片机STC89C52  3

2。3  红外收发电路  7

2。4  干涉仪变焦镜头 10

2。5  继电器控制电路 14

3  红外遥控系统的软件设计 16

3。1  单片机中断部分 16

3。2  红外解码部分 16

4  系统调试 21

结论  24

致谢  25

参考文献  26

1  绪论

激光干涉仪是一种精度极高的光学测量仪器,在光学计量和光学测试等领域有非常广泛的用途,可以用来测量各类光学零件的面型、折射率均匀性、棱镜的角度误差、光学系统的波像差等。激光干涉仪中使用的变焦镜头与定焦镜头相比可以大大扩展干涉仪的测试范围,同时也方便调整光强的大小。由于干涉仪的使用环境非常严苛,需要避免测量环境中的震动、杂光、气流变化等[[

[] 揭应平。 干涉仪测试系统的改进及测量范围扩展的研究[D]。南京理工大学,2002。]]。论文网

随着微电子技术的迅速发展,许多现代技术如遥控技术和图像处理技术也被应用到干涉仪的设计之中,并且其测量方式也越来越方便快捷[[[] Campagnaro, F。; Favaro, F。; Guerra, F。; Sanjuan Calzado, V。; Zorzi, M。; Casari, P。 "Simulation of multimodal optical and acoustic communications in underwater networks",  OCEANS 2015 - Genova, On page(s): 1 - 7]]。将红外遥控技术应用到干涉仪的设计中,可以使实验者方便地进行非接触式操作。因为红外光不属于可见光,因此在干涉测量中不会引入杂散光,也不会干扰电气设备。

20世纪以来,随着电子与通信技术的迅速发展,遥控技术在生产生活的应用范围越来越广泛,同时不同类型的遥控技术均具有各自的优缺点,以下将简要介绍应用最广泛的也是最为常见的几种遥控技术的应用领域与发展现状。 STC89C52单片机光开关的光纤型延迟线结构图:http://www.youerw.com/zidonghua/lunwen_88651.html

------分隔线----------------------------
推荐内容