PLC自动灌装流水线系统设计+梯形图

摘要：本文根据自动灌装流水线的出瓶单元和灌装单元的工艺流程使用罗克韦尔自动化公司的ControlLogix系统进行控制。首先根据工艺流程进行总体方案设计，进行硬件选型，确定好电磁阀、变频器、光电传感器、光电开关等；然后通过使用RSLogix5000 编程软件，用梯形图编写实现自动灌装流水线的出瓶单元和灌装单元控制系统设计，用组态软件FactoryTalk View SE设计上位机管理系统，做出监控画面；最后通过RSlinx连接软件把这两个软件连接起来，在上位机管理界面进行控制。经过调试，在模拟运行下，此控制系统可以安全、有效的运行管理，通过本文对罗克韦尔PLC的介绍，可基本了解学习这些软件的使用方法，也可了解自动灌装流水线的出瓶单元和灌装单元的工作方式及控制方法，从而加深了对自动化工业控制的认识。35682
毕业论文关键词：自动灌装流水线；RSLogix5000；FactoryTalk View SE；RSLinx
Automatic canned production line system design (1)
Abstract: Based on the automatic filling production line of bottle unit and the technological process of the filling unit using rockwell automation company ControlLogix system control.First of all, according to the technological process for the overall scheme design, hardware selection, determine the good electromagnetic valve, frequency converter, photoelectric sensor, photoelectric switch, etc.Then by using RSLogix5000 programming software, written in ladder diagram to realize automatic filling production line of the bottle filling unit and unit control system design,using configuration software FactoryTalk View SE design PC management system, to monitor screen;finally through RSlinx connection software to connect the two software, management interface in the upper machine control.After debugging, under the simulation run, this control system can be safe and effective operation management.In this article with the introduction of the rockwell PLC, can be a basic understanding of learning the use of the software method, also can understand the automatic filling production line out of the bottle the workings of a unit and filling unit and control method, so as to deepen the understanding of industrial automation control.
Key Words: Automatic filling production line； RSLogix5000； FactoryTalk View SE
；RSLinx
目录
1.    绪论    1
1.1.    课题研究背景    1
1.1.1. 自动灌装流水线国外发展情况    2
1.1.2. 自动灌装流水线国内发展情况    2
1.2. 自动灌装流水线的发展趋势    3
2.    自动灌装流水线总体方案设计    5
2.1.    控制对象介绍分析    5
2.2.    方案流程图    6
2.3.    总体方案设计    6
3.    自动灌装流水线硬件设计    8
3.1.    CompactLogix L32E    8
3.2.    硬件选型    10
3.3.    I/O表    14
4.    自动灌装流水线软件设计    15
4.1.    RSLinx介绍    15
4.2.    RSLogix5000应用开发软件简介    15
4.2.1.    RSLogix5000应用开发软件    15
4.2.2.    RSLogix5000应用开发软件的主要功能    16
4.2.3.    RSLogix5000编程简介    17
4.3.    FactoryTalk View SE简介    17
4.4.    梯形图    18
4.5.    上位机管理界面设计    20 PLC自动灌装流水线系统设计+梯形图:http://www.youerw.com/zidonghua/lunwen_33734.html