毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

51单片机家庭简易防盗报警系统设计+电路图+程序

时间:2021-12-27 16:35来源:毕业论文
单片机的家庭简易防盗报警系统设计与实现红外线报警包含检测线路和报警线路两个部分,当检测线路检测到有人闯入时,就会使单片机接收到的信号发生变化,从而触发报警

摘 要:随着生活水平的提高,很多人会利用假日外出旅游,家中无人而被盗的案件时有发生。本文设计了一套基于单片机的家庭防盗报警系统,该系统由定时照明和红外线报警两个部分组成,选用51单片机作为主控芯片。用户通过按键直接给单片机设置线路通断的时间,当单片机判断设置吻合时,就会输出信号以控制继电器通断,从而使得照明灯能够定时工作;红外线报警包含检测线路和报警线路两个部分,当检测线路检测到有人闯入时,就会使单片机接收到的信号发生变化,从而触发报警。该系统能够起到可靠的安全防盗作用,具有一定的实用和推广价值。76334

毕业论文关键词:防盗系统,定时照明,报警,单片机,555定时器

Abstract: With the improvement of living standards, many people prefer to travel during the holidays when stolen cases occur from time to time at those vacant houses。 Therefore, a family anti-theft alarm system is designed based on SCM is this thesis, which is comprised of the timing light and infrared alarm。 The 51 microcontroller is chosen as the main control chip。 The user can directly set the circuit’s on-off time for the SCM by key, so that when the set time is equal to actual time, the control relay will be controlled by the output signal and the lights can work on time。 Infrared alarm contains two parts: detection circuit and alarm circuit。 When someone intruding is detected by the detecting circuit, the signal received by SCM will change, and the alarm system will be triggered。 The system has a function of reliably anti-theft as well as has a certain practical and promotional value。 

Keywords: anti-theft system, timing lighting control, alarm system, SCM, 555 timer

目   录

1  前言 3

1。1 背景和意义 3

1。2  现状分析 4

1。3论文主要内容 5

2 硬件电路设计 5

2。1 单片机介绍 6

2。2 复位电路 7

2。3 晶振电路 8

2。4 电源模块 8

2。5 显示模块 9

2。6 控制按钮模块 10

2。7 继电器控制模块 10

2。8 信号采集模块 11

2。9 报警模块 11

3 软件流程设计 13

4  运行解析 15

5  发展前景 17

结  论 18

参 考 文 献 19

致  谢 20

附录A 整体线路原理图 21

附录B定时程序 22

附录C 报警程序 28

1  前言

1。1 背景和意义 

现代社会经济发展迅速,人们的生活水平也在不断提升,很多家庭都会利用节假日来外出旅游,然而因为家中无人而出现重要财物被盗的情况时有发生。根据相关数据显示,节假日期间,家中财物失窃的报警案例正在逐年增加。由于失窃金额越来越大,案发地带 方案。论文网

51单片机家庭简易防盗报警系统设计+电路图+程序:http://www.youerw.com/zidonghua/lunwen_87576.html
------分隔线----------------------------
推荐内容