毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C52单片机抢答器设计+程序+电路图

时间:2021-12-12 10:56来源:毕业论文
基于AT89C52单片机的八路抢答器,是利用AT89C52单片机及外围接口实现的抢答系统。此抢答器是利用单片机的定时器计数器定时和计数的原理,用按键通过开关电路输入各路的抢答信号

摘 要:进入 21 世纪,在各种智力竞赛中,为了更准确、公平地判断选手们的表现,数字 抢答器应运而生。本文设计了一种基于 AT89C52 单片机的八路抢答器,是利用 AT89C52 单 片机及外围接口实现的抢答系统。此抢答器是利用单片机的定时器计数器定时和计数的原 理,用按键通过开关电路输入各路的抢答信号,经过单片机的处理输出控制信号,通过软、 硬件的结合,从而实现单片机控制的抢答器系统。使得系统能够准确地进行抢答和计分, 同时使数码管能够直观的显示当前状态,具有反应快、操作简便、实用性强等特点。75415

毕业论文关键词:AT89C52,抢答器,计时器

Abstract:Entering the 21st century, digital responder first arises at the historic moment in order to judge the performance of the players in the various intelligence contests more accurately and fairly。 An eight-way responder based on AT89C52 is designed in this paper, the responder uses AT89C52 and its peripheral interface。 The principle of timer’s timing and counting is used in this responder,  and the  various ways of answering signal by switching circuit  inputted  with the key。

Then the controlling signal outputted after processed in AT89C52, thereby realizing  the  system of responder through a combination of software and hardware。 So the system can answer and score accurately, while the digital tube can display the current state, and it has the characteristics of fast  response,  simple   operation,  and strong practicability。

Keywords:  AT89C52, responder, timer

1 绪论 4

2 总体方案设计与要求 4

2。1 设计的任务及要求 4

2。2 设计方案论证 4

3 系统硬件的设计 6

3。1 时钟频率电路的设计 6

3。2 复位电路的设计 7

3。3 显示电路的设计 8

3。4 键盘扫描电路的设计 9

3。5 发声电路的设计 10

4 系统软件的设计 11

4。1 软件电路设计 11

4。2 程序功能流程图 12

5 软硬件综合调试 13

5。1 软件仿真 13

5。2 系统调试 15

5。3 结果与心得体会 16

结论 19

参考文献 20

致谢 21

附录 C 语言系统程序 22

1 AT89C52单片机抢答器设计+程序+电路图:http://www.youerw.com/zidonghua/lunwen_86332.html

------分隔线----------------------------
推荐内容