毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

RFID手持终端的设计

时间:2019-07-10 19:22来源:毕业论文
基于嵌入式系统的RFID手持终端为对象,论述了基于STM32芯片及外围电路实现一种手持式移动RFID标签读写设备,可灵活用于各类现场设备/货物RFID标签的识别、存储,并在现场予以显示

摘要:射频识别(RFID)技术,是一种利用无线电信号来识别目标并读写目标内含有的数据的技术,这种技术可以不通过识别系统与目标建立机械或者光学接触来达到识别读写的目的,是一种十分便利的技术。将这种技术与现在被广泛使用的嵌入式系统进行适当的结合后,可以使得该技术在许多领域上的应用变得更加的轻便灵活。随着当今科技的发展,嵌入式系统的应用变得更加的轻便化,小型化,更给了RFID技术更大的利用空间。本文将基于嵌入式系统的RFID手持终端为对象,论述了基于STM32芯片及外围电路实现一种手持式移动RFID标签读写设备,可灵活用于各类现场设备/货物RFID标签的识别、存储,并在现场予以显示,同时具有数据上传功能,方便上级单位进行数据汇总和收集,进行管理作业。36875
毕业论文关键词:    RFID技术;嵌入式系统;手持终端; STM32;
The design of RFID handheld terminal
Abstract: Radio frequency identification technology(RFID) is a kind of technology which use radio signal to identify target and reading and writing data which is included in target, this kind of technology is very convenient because it can achieve the purpose of recognition, reading and writing data without establish mechanical or optical contact with the target and recognition system. Proper combined with embedded system which is now widely used, the application of this kind of technology can become more flexible in many fields. With the development of modern science and technology, the application of embedded system become lighter and smaller and give RFID more room to use. The study designs and implements a handheld mobile RFID label reading device based on STM32 chip and peripheral circuit, which can be used for various field apparatus and the identification of RFID label,and will be displayed on the site with the data upload function, and make it convenient for the higher units to take data collection, and then take it into management.
Keywords:    RFID technology, embedded system, handheld terminal, STM32
目录
1  绪论    5
1.1  课题的研究背景和意义    5
1.2  手持终端技术的发展    5
1.3  嵌入式系统    6
1.3.1  嵌入式系统简介    6
1.3.2  嵌入式系统的特点    7
1.4  RFID技术    7
1.4.1  RFID技术简介    7
1.4.2  RFID技术的优点    8
1.4.3 RFID技术的发展和应用    9
1.5 课题主要内容及结构安排    10
2  系统的总体方案    11
2.1  中央处理器    11
2.2  RFID标签卡    12
2.3    人机交互界面    15
2.3.1    显示器    15
2.3.2    输入部分    16
2.3.3 供电部分    17
3 硬件详细设计和实现    17
3.1关于MCU    17
3.2  读卡设备RC522和RFID卡    18
3.2.1  RC522在系统设计中的实现    18
3.2.2  RC522与终端主控的连接电路    19
3.2.3 接口选择    19
3.3  液晶触摸屏    20
3.3.1  液晶显示控制器简介    20
3.3.2  ILI9341控制器结构    20
3.3.3  像素点的数据格式    21
3.3.4  LCD的驱动    22
3.3.5 TSC2046触摸屏控制器    23
3.4 外置Flash储存器    24
软件设计与调试    25 RFID手持终端的设计:http://www.youerw.com/zidonghua/lunwen_35526.html
------分隔线----------------------------
推荐内容