毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C51单片机热敏电阻的数字温度计设计+电路图

时间:2022-10-29 22:13来源:毕业论文
基于热敏电阻PT100的数字温度计的测温原理和设计过程。此次设计在主要分为三大部分:硬件设计部分、软件设计部分、以及protues仿真部分。其中硬件部分又分为测温模块(PT100)

摘要在信息化的二十一世纪,温度测量始终在计量学领域扮演着一个重要的,不 可或缺的角色。随着时代的进步和发展,各种温度测量技术和各种测量仪器不断 被开发出来,使得它已经延伸至人类的各个领域并发挥着越来越重要的作用。84911

本次设计论文主要详细阐述了基于热敏电阻 PT100 的数字温度计的测温原理 和设计过程。此次设计在主要分为三大部分:硬件设计部分、软件设计部分、以 及 protues 仿真部分。其中硬件部分又分为测温模块(PT100)、信号放大模块(LM324)、A/D 转换模块(ADC0804)、控制模块(AT89C51)、显示模块(LED 数码管);仿真编译部分则采用 keil 和 protues 软件。首先测温模块将 PT100 作 为温度传感器采集温度(电压),经过放大后传说至 A/D 转换模块,最后经过 控制模块的单片机 AT89C51 处理后在显示模块显示出来。

毕业论文关键字:热敏电阻 PT100,单片机 AT89C51,PROTUES

Abstract In the information age of the 21st century, the temperature measurement in the field of metrology always plays an important and indispensable role。。 As the progress and development of The Times, all kinds of temperature measurement technology and a variety of measuring instruments have been developed, it has been extended to all spheres of human and play an increasingly important role。

This paper mainly expounds the design based on the thermal resistance of mathematical thermometer PT100 temperature measuring principle  and design process。 This design mainly pided into three parts: hardware design, software design, as well as the protues simulation part。 The hardware part is pided into temperature measurement module (PT100), signal amplification module (LM324), A/D conversion module (ADC0804), the control module (AT89C51), digital tube (LED) display module; Compile the simulation part adopts keil and protues software。 First of all, temperature measurement module will PT100 as A temperature sensor to collect the temperature (voltage), after amplification legend to the A/D  conversion  module, finally after dealing with the control module of single chip microcomputer AT89C51 displayed on the display module。

Keywords: Thermistor PT100, single chip microcomputer AT89C51, PROTUES

目 录

第一章 绪 论 1

1。1 设计背景 1

1。2 设计意义 2

1。3。 国内外研究现状 2

1。3。1 温度计分类 2

1。3。2 测温材料的近期发展 3

1。3。3 热电偶和热电阻材料的竞争 3

1。3。4 温度计的发展 5

1。3。5 热电阻温度计和热电偶温度计的不同 5

1。4 设计任务 6

第二章 系统硬件电路设计 7

2。1 PT100 测温电路 7

2。2 信号放大电路 8

2。3 A/D 转换电路 9

2。4 控制电路 11

2。5 显示电路 15

2。6 报警电路 17

第三章 系统软件设计 19

3。1 软件总体流程设计 19

3。2 程序运行的流程图 19

3。3 系统主函数 AT89C51单片机热敏电阻的数字温度计设计+电路图:http://www.youerw.com/zidonghua/lunwen_101212.html

------分隔线----------------------------
推荐内容