毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

微粒射流电沉积制备涂层的组织结构观察

时间:2022-05-28 21:32来源:毕业论文
通过微粒射流电沉积的方法制备涂层,通过控制变量法即控制两个参数不变,变换一个参数来得到涂层的微观结构。并通过扫描电子显微镜观察涂层,对比分析组织结构与工艺的关系

摘要如今,机械装备、工程车辆、油田设备的腐蚀及其大量无用废旧零件现象都是大家一直关注的问题,而近年来大量的实验与报道都说明对设备进行镀层防护与对废旧零件修复是一种有效可行的方法。节约成本,有效的变废为宝。 81064

本次设计通过微粒射流电沉积的方法制备涂层,通过控制变量法即控制两个参数不变,变换一个参数来得到涂层的微观结构。并通过扫描电子显微镜观察涂层,对比分析组织结构与工艺的关系。通过对组织结构的观察反映出工艺参数对组织性能的影响从而改善工艺参数。

本项实验对于废旧零件的修复,腐蚀零件的保护上有着非常重要的意义。本毕业设计论文是在老师的指导下经过大量的实验,并针对实验结果在金相显微镜下对涂层做最严谨的数据分析,得到的实验结果。

毕业论文关键词:微粒射流电沉积  涂层  微观结构  修复

Microstructure of coating prepared by particle jet electrodeposition

Abstract Now,machinery and equipment, vehicle engineering, oilfield equipment corrosion and a lot of useless scrap parts phenomenon is people have paid attention to the problem, and in recent years, lots of experiments and reported that the equipment of protective coating and is a feasible and effective method of scrap parts repair, save cost, effectively turning waste into treasure。

This design through the method of particle jet electrodeposition coating was prepared, by method of control variables that control two parameters unchanged, transform a parameter to get the coating microstructure。 And by scanning electron microscopy coatings was observed, comparative analysis of relationship between organizational structure and process。 Observation on organizational structure reflects the effects of process parameters on the performance of the organization so as to improve the process parameters。

In this experiment, to delay the passivation of the tool or scrap, scrap parts repair, parts corrosion protection has a very important significance。 This graduate design thesis is under the guidance of a teacher after a lot of experiments and the experimental results under the scanning electron microscope to coating do the most rigorous data analysis, obtained the experimental results。

Key Words: Particle jet electrodeposition  Coating  Microstructure  Repair

目录

摘要 0

Abstract 2

第一章  绪论 4

1。1 研究背景及现状 4

1。2 研微粒射流电沉积实研究的意义 4

1。3 微粒射流电沉积存在的缺陷 5

第二章  微粒射流电沉积制备涂层的实验内容 6

2。1 微粒射流电沉积制备涂层的基本原理 6

2。2 微粒射流电沉积制备涂层的工作平台 7

2。3 微粒射流电沉积制备涂层工作平台的组装及调试 14

2。4 微粒射流电沉积制备涂层的具体实验 16

第三章  观察分析涂层的微观组织形貌 19

3。1 金相显微镜的简介 19

3。2 电流对涂层表面形貌的影响 20

3。3 流量对涂层表面形貌的影响 21

3。4 层数对涂层表面形貌的影响 微粒射流电沉积制备涂层的组织结构观察:http://www.youerw.com/jixie/lunwen_94456.html

------分隔线----------------------------
推荐内容