毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

Pro/E的便携式桌面3D打印机的机体设计和结构分析

时间:2022-12-19 22:56来源:毕业论文
设计一种便携式桌面级的3D打印机的结构,并对设计出的3D打印机的结构进行分析,设计部分包含了打印机整体尺寸的确定、传动方案的选取、步进电机的选取以及传感器的选取

摘要传统的制造业往往都是先开发模具,再制造出样品,运用3D打印技术能大大缩短生产时间,减少成本。有一些好的设计理念,无论结构有多复杂,都能用3D打印技术短时间内制造出来。3D打印技术适用范围很广,建筑学、医学、生物研究甚至是航空航天领域都要用到3D打印技术,为科学研究提供了重要的技术支持。86658

本文是根据相应的指标,设计一种便携式桌面级的3D打印机的结构,并对设计出的3D打印机的结构进行分析,设计部分包含了打印机整体尺寸的确定、传动方案的选取、步进电机的选取以及传感器的选取,通过比较市面上常见的三种桌面级3D打印机,最终确定3D打印机的整体结构为delta型。为满足打印要求,需要对其结构进行分析,计算出打印空间、同步带的寿命、打印精度以及对其主要部件进行强度校核。为检验整体方案的可行性,设计完之后运用Pro/E5。0对3D打印机进行三维建模,建出主要零部件之后再进行整机装配,装配结束后定义三个伺服电机对设计出的3D打印机的打印动作进行仿真。

毕业论文关键词:3D打印机;机体设计;结构分析;三维建模

         

Abstract  The traditional manufacturing industry are often the first mold development, manufacturing samples, using 3D printing technology can greatly shorten the production time, reduce costs。 Some good design ideas, regardless of the structure is more complex can use 3D printing technology in a short time produced 3D printing technology is suitable for a wide range, architecture, medicine, biology research even aerospace field used by 3D printing technology and scientific research provides important technical support。

     This paper is according to the corresponding index, design the structure of a portable desktop 3D printer, and a 3D printer to design the structure analysis, design part includes printer overall dimensions of the determined transmission scheme selection, stepper motor selection and sensor selection, by comparing the common market, three kind of desktop 3D printer, and ultimately determine the overall structure of 3D printers for delta type。 In order to meet the requirements of printing, the structure analysis, the calculated print space, the lifetime of the synchronous belt, print accuracy and the main components strength check。 To test the whole scheme is feasible。 After design using Pro/E5。0 on a 3D printer for three-dimensional modeling, build the main parts and the whole assembly, after the end of the assembly defined three servo motor to design a 3D printer printing operation simulation。

Keywords:3D printer; machine design; structural analysis; 3D modeling

目 录

第一章 绪论 1

1。1 本文的研究目的和意义 1

1。2 3D打印机的国内外发展现状 2

1。2。1 国内研究现状 2

1。2。2国外研究现状 4

1。3 本课题的研究内容 5

第二章 方案论证 6

2。1 3D打印机整体结构的确定 6

2。2 运动机构的选择 8

2。3 本章小结 9

第三章 结构设计 10

3。1 工作原理 10

3。2 3D打印机整体尺寸计算 11

3。3 Rostock运动机构设计 12 Pro/E的便携式桌面3D打印机的机体设计和结构分析:http://www.youerw.com/jixie/lunwen_112054.html

------分隔线----------------------------
推荐内容