毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

ANSYS汽车结构件结构强度分析

时间:2022-01-10 20:51来源:毕业论文
采用ANSYS Workbench 15.0版本对汽车A柱加强板进行有限元分析在UG中建立有限元模型,并且按照要求对汽车A柱加强板进行静力学分析,同时对零件本身进行动态分析,并且提取前六阶模态振

摘要对于这次研究汽车A柱加强板,关系到汽车整体的安全性,以及对于车主开车时的舒适性有着很大的影响,对汽车A柱加强板的设计时,应用到有限元法对汽车A柱加强板进行静力学分析以及动态特性分析,并且对其结构的强度进行评价以及分析总结。必须要充分掌握机械零件的分析方法,这样才能对零件提出更好地分析理解,这样可以对零件提出一些设计优化,提高其性能,均有很大的意义。76883

现如今有限元分析也愈来愈显得格外重要,涉及的领域也是越来越多,包括航天航空、船舶、汽车等诸多大型领域,以有限元分析为基础的设计方案已成为了主流研究思想。在运用到有限元分析法时,分解了机械零件的表面,变成了一个个细小的单元,相当于把求解域分解成有限数量的未知量去求解,有限元分析是把简单的问题代替了复杂的问题,在进行求解,然而由于是近似分析,所以求出的解为近似解。

本次采用ANSYS Workbench 15。0版本对汽车A柱加强板进行有限元分析在UG中建立有限元模型,并且按照要求对汽车A柱加强板进行静力学分析,同时对零件本身进行动态分析,并且提取前六阶模态振型图,得到它本身的固有频率以及相对应的变形样式图,最后可以根据静态分析以及动态分析下对零件提出优化改进。

该论文有图75幅,表2个,参考文献21篇。

毕业论文关键词:加强板  有限元法  静力分析  动态分析

Structural strength analysis of a certain type of automobile structure

Abstract Now in the field of engineering, finite element analysis plays more and more important role, involved in the field is more and more, including aerospace, shipbuilding, automobile and so on many large areas, with finite element analysis based design has become the mainstream theory。 In the application to finite element analysis, decomposition of the mechanical parts of the surface, into one small unit, equivalent to the problem domain is decomposed into a finite number of unknowns to solve, finite element analysis is the simple problems instead of the complicated problem, in solving。 However, due to the approximate analysis, so seeking for the solution for approximate solutions。

For the study of the automobile a column reinforced plate, is related to the vehicle's safety, and for owners when driving comfort is a great influence, on automobile a column reinforced plate design, applied to the finite element method of automobile a column reinforcement plate static analysis and dynamic characteristics analysis and the strength of the structure were evaluation and analysis。 Must fully grasp the mechanical parts of the analysis method, so as to make a better understanding of the parts, so that parts of the design optimization, improve their performance, have great significance。

The use of ANSYS Workbench version 15。0 for automobile a column reinforcing plate in UG to establish a finite element model for the finite element analysis, and in accordance with the requirements of automobile a column reinforcing plate static analysis, dynamic analysis of the part at the same time, and a graph of the first six order modal shape is extracted, its natural frequency and corresponding deformation pattern of, finally according to the static analysis and dynamic analysis of parts put forward optimization and improvement。

Key Words: Strengthening  plate finite element method  static analysis  dynamic analysis

目  录

摘  要 I

Abstract II

目  录 IV

1 绪论 1

1。1当代背景介绍 ANSYS汽车结构件结构强度分析:http://www.youerw.com/jixie/lunwen_88260.html

------分隔线----------------------------
推荐内容