毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

搅拌桩支护结构基坑支护设计+CAD图纸

时间:2020-06-21 10:24来源:毕业论文
丹阳市东方嘉园1、2#楼基坑支护设计。根据设计任务书的要求,综合考虑安全可靠、经济合理、技术先进、施工方便,以及工程所在地区地质条件、场地条件、周边环境、结构设计等因

摘要本设计为丹阳市东方嘉园1、2#楼基坑支护设计。根据设计任务书的要求,综合考虑安全可靠、经济合理、技术先进、施工方便,以及工程所在地区地质条件、场地条件、周边环境、结构设计等因素,来进行基坑支护的结构设计。确定支护方案主体采用搅拌桩支护结构,局部采用悬臂式钻孔灌注桩支护,利用逐层开挖支撑力不变的法进行内力计算。设计内容主要包括:支护体系的方案的比较和选型、土体压力的计算以及支护结构的内力的计算、基坑土体的稳定性、降水设计、施工组织设计、电算校核等。51368

设计依据为《建筑基坑支护技术规程》(JGJ120-12)、《建筑桩基技术规范》(JGJ 94-08)。

毕业论文关键词:基坑;搅拌桩;钻孔灌注桩;设计

Abstract

This is designed to DangYang Oriental Garden 1,2 building design of foundat-ion pit support .According to requirements of the design program, considered safe, reliable, technologically advanced, to facilitate the construction and engineering areas where geological conditions, site conditions, the surrounding environment, and factors such as structural design, the foundation pit was designed Support for the programme  identified by cast-in situ piles and the bored piles, and concrete brace the same  method of calculation of internal forces. Design features include: bracing system of comparison and selection, soil pressure and the calculation of the bracing structure of the internal force, the stability of soil excavation, dewatering design, construction document design, construction document design, construction planning and scheduli-

ng document, and ICC check .Design is the main basis for “construction pit supporting Technical Specification”(JGJ120-12),  “construction pile technical specifications”(JGJ94-08).

Key words: foundation,  cast-in situ piles,  the bored piles,  design 

目   录

第一章 绪论 1

1.1 引言 -1 

1.2 课题文献综述 -1

1.2.1 目前研究现状 1

   1.2.2 目前围护结构及其各自的特点 -2

1.3 存在的主要特点 4

1.4 课题主要研究内容 -5

第二章 设计方案选择 -6

  2.1 工程概况 -6

  2.2 基坑周边环境 -6

  2.3 工程地质概况 -6

     2.3.1 地质概况 7

     2.3.2 水文概况 7

  2.4 设计依据 -7

  2.5 支护结构方案选择 -8

  2.6 其它说明 -8

第三章 基坑支护结构计算 9

  3.1 土压力设计理论 9

     3.1.1 计算理论 9

     3.1.2 计算公式 9

  3.2 水泥土墙(深层搅拌桩)设计计算理论 10

     3.2.1 设计计算内容 10

     3.2.2 设计计算步骤方法 10

  3.3 排桩(悬臂式钻孔灌注桩)设计计算理论 -13

     3.3.1 设计计算内容 13

     3.3.2 设计计算步骤方法 13

  3.4 设计计算区域划分 -16 

  3.5 设计计算基本相关参数 -16

  3.6 ABC区段支护结构设计计算 -17

     3.6.1 墙体宽度与嵌入深度初步取值 -17

     3.6.2 主、被动土压力计算 -17

     3.6.3 主、被动土压力合力及其作用位置计算 -19

     3.6.4 设计验算 20

     3.6.5 墙体构造布置 22

     3.6.6 压顶梁设计计算 -22

  3.7 CDE区段支护结构设计计算 -23

     3.7.1 墙体宽度与嵌入深度初步取值 -23 搅拌桩支护结构基坑支护设计+CAD图纸:http://www.youerw.com/gongcheng/lunwen_54979.html

------分隔线----------------------------
推荐内容