毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

基于TiO2系臭氧分解催化剂的制备及性能研究

时间:2018-05-08 14:28来源:毕业论文
通过以沉积Ag微粒、Al还原等方法,对二氧化钛进行改性,并对改性后催化剂的催化性能进行探究,通过硫代硫酸钠标定被氧化的碘化钾来测定臭氧催化分解性能

摘要现今,臭氧已成为继PM2.5后另一主要污染物,臭氧超标主要是来自氮氧化物和挥发性有机物。近地空气中的臭氧不仅可以直接侵害人体的呼吸系统,甚至可以损害神经系统。更重要的是,臭氧会增加空气的氧化性,增加城市产生光化学烟雾的风险。对人们的健康与生活都带来极大威胁。在本文中,通过以沉积Ag微粒、Al还原等方法,对二氧化钛进行改性,并对改性后催化剂的催化性能进行探究,通过硫代硫酸钠标定被氧化的碘化钾来测定臭氧催化分解性能。结果表明,Ag对P25改性在3%的负载量下制得的样品催化性能最好,为85%。TiO2-x在催化初期的催化性能最高并有良好的可重复性,Ag-TiO2-x在催化初期催化性能稍低于TiO2-x但下降慢,考虑改性成本所以不推荐。22489
毕业论文关键词:臭氧分解;二氧化钛;改性;催化效率
Abstract
Nowadays, the ozone has become another major pollutant after PM2.5, exceeded ozone mainly from nitrogen oxides and volatile organic compounds. Ozone in the air can not only directly against the body's respiratory system, and even damage to the nervous system. More importantly, the ozone will increased air’s ability of oxidation, increasing the risk of urban photochemical smog. It’s a tremendous threat to our health and life. In this paper, the titanium dioxide modified by methods of depositing Ag particles and reduction of TiO2 by Al, and study the catalytic performance of the modified catalyst. The results show that, the 3% Ag in the P25 catalyst show the best performance by 85%. TiO2-x have a maximum Catalytic Activities in the beginning of test and it also have a good reproducibility, the catalytic performance of Ag-TiO2-x is lower than TiO2-x in the beginning, but it has a slow decrease. Considering the cost of modification, that is not recommended.
KeyWords:Degradation of Ozone;TiO2;Modified;Catalytic efficiency
 目录
1 绪论    1
1.1 TiO2材料研究进展    1
1.1.1 TiO2的发展    1
1.1.2 TiO2的制备方法    1
1.1.3 TiO2复合材料    3
1.1.4 纳米TiO2的应用    3
1.2 臭氧的概述    4
1.2.1 臭氧的性质与应用    4
1.2.2 臭氧的危害    5
1.2.3 臭氧处理方法    5
1.3 臭氧浓度监测    6
1.4 臭氧分解催化剂研究进展    6
1.5 TiO2臭氧分解催化剂    9
1.5.1 TiO2臭氧分解催化剂研究进展    9
1.5.2 TiO2改性臭氧分解催化剂    9
1.6 选题思路    10
2 实验部分    12
2.1 实验原料与实验仪器    12
2.2 实验过程    13
2.2.1 不同负载量Ag-P25催化剂的制备    13
2.2.2 黑钛(TiO2-x)催化剂的制备    13
2.2.3 3%Ag-黑钛(Ag-TiO2-x)催化剂的制备    14
2.3 分析表征    14
2.3.1 透射电镜(TEM)    14
2.3.2 臭氧分解率的测试与计算    14
3 结果讨论    16
3.1 Ag-P25复合材料的制备与催化性能研究    16
3.1.1 Ag-P25催化臭氧分解性能    16
3.1.2 Ag-P25紫外-可见漫反射光谱    17
3.1.3 Ag-P25形貌分析    18
3.1.4 Ag-P25催化原理    18
3.2 黑钛(TiO2-x)催化性能研究    20
3.2.1 TiO2-x形貌分析    20
3.2.2 TiO2-x的XPS分析    21
3.2.3 TiO2-x的紫外-可见漫反射    22
3.2.4 TiO2-x的催化性能    22 基于TiO2系臭氧分解催化剂的制备及性能研究:http://www.youerw.com/cailiao/lunwen_15151.html
------分隔线----------------------------
推荐内容