毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

PLC自来水厂远程监控系统设计+梯形图+源程序

时间:2022-09-29 22:31来源:毕业论文
根据自来水厂的常规生产流程,利用组态王6.55设计了抽取原水、预处理、加药、再加氯、过滤、蓄水、输水等七个监控系统界面,该系统能对阀门开关、水泵电机等进行远程控制,并根

摘要为保证自来水厂安全有效的运行,提供一个高质量的供水环境,在自来水厂的控制系统中,主要利用计算机控制系统对水厂净水环节进行分布式远程监控。

本论文根据自来水厂的常规生产流程,利用组态王6。55设计了抽取原水、预处理、加药、再加氯、过滤、蓄水、输水等七个监控系统界面,该系统能对阀门开关、水泵电机等进行远程控制,并根据传感器检测的信号对水池的水位、反应罐的液位等进行远程监控,同时具备数据实时显示和刷新的功能。为了达到控制要求,设计了自来水厂控制流程图、I/O输入输出接口配置、梯形图控制程序,利用开关量模拟输入输出信号,在三菱GX Developer仿真软件上对该系统进行模拟仿真,整个仿真结果符合自来水厂远程监控系统的控制要求,对自来水厂的自动化建设具有一定的实用性。84302

毕业论文关键词:组态王;可编程控制器;水厂工艺流程;远程监控系统

Abstract For the purpose of guaranteeing the safe and effective operation of water plant , providing a high quality of the water environment,in the control program of waterworks ,computer control system is primarily used for distributed remote monitoring in the process of water purification。 

In this passage,according to the water plant of conventional production process,using Kingview 6。55 to design the extract monitor screen ,including raw water, pretreatment, dosing process, add chlorine process, filtering and other seven control system interface。 This system can carry on the remote control to the valve switch, the pump motor and so on,and carries on the remote monitoring based on the water level of the pond, the liquid level of the reaction tank。 It also has the function of displaying and refreshing the data in time。 To meet the requirement of control, designing control flow chart of waterworks , the I/O input and output interface,ladder diagram control procedures,using switching signals to analog input and output signal。Mitsubishi GX Developer is applied to simulation the system The result of simulation conform to the requirements of the control of remote monitoring system of water works,which has a certain practicality for the automated construction of waterworks。

Keywords:Kingview;Programmable Controller; the production process of water plant;remote monitoring

目  录

第一章  绪论 1

1。1 选课的目的和意义 1

1。2 自来水厂远程监控系统的研究现状与发展 1

1。3 本文的主要内容 2

第二章  工控软件组态王的介绍 3

2。1 组态软件的含义 3

2。2 组态软件的构成 3

2。3 组态软件的功能和特点 3

2。4 组态王软件的介绍 4

2。4。1 组态王概述 4

2。4。2 组态王6。55的主要功能 4

2。5 组态王程序设计的步骤 5

2。6 本章小结 6

第三章  自来水厂组态王监控界面的设计 7

3。1 水厂生来水的工艺流程 7

3。2 组态王画面的制作 8

3。2。1 创建组态王工程 8

3。2。2 数据变量的定义 PLC自来水厂远程监控系统设计+梯形图+源程序:http://www.youerw.com/zidonghua/lunwen_99895.html

------分隔线----------------------------
推荐内容