毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

PLC智能信息处理的扶梯节能控制系统设计+梯形图

时间:2022-04-10 22:20来源:毕业论文
综合比较国内外现行几种已推广应用的自动扶梯节能方案后,提出基于共直流母线传动技术的扶梯多段速变频调速综合解决方案。通过搭建实验平台,模拟扶梯实际运行

摘要:因自动扶梯使用场合客流量有明显的高低峰时期,现行的全速运行扶梯对于能源造成大量浪费,也增加了扶梯机械损耗,加大了扶梯使用的成本。本文在综合比较国内外现行几种已推广应用的自动扶梯节能方案后,提出基于共直流母线传动技术的扶梯多段速变频调速综合解决方案。通过搭建实验平台,模拟扶梯实际运行,测算相应空载功耗,下行扶梯日功耗,测算结果达到预期节能目标。并与基于能耗制动的全变频调速扶梯进行理论能耗计算对比,更加直观的证明本文所提方案的可行性和节能效果的可观性。79766

毕业论文关键词: 扶梯;节能;变频器;共直流母线

Design and development of escalator energy control system based on intelligent information processing

Abstract:  Due to the use of escalators, there are obvious high and low peak periods。 The current full-scale escalator has caused a lot of waste for energy。 It also increases the mechanical loss of escalators and increases the cost of escalators。 In this paper, a comprehensive solution of escalator multi-speed and variable frequency speed control based on common DC bus technology is proposed in this paper。 Through the construction of experimental platform, simulate the actual operation of the escalator, calculate the corresponding no-load power consumption, downstream escalator power consumption, the measured results to achieve the desired energy-saving targets。 And with the energy consumption of the whole frequency control escalator to calculate the theoretical energy consumption comparison, more intuitive proof of the feasibility of this proposed program and the feasibility of energy efficiency。

Keywords:  escalator;  energy saving;  inverter;  common-DC-bus       

目录

第一章  绪论1

1。1扶梯能源节约的必要性·1

1。2扶梯能耗分析·1

1。2。1 减少电机损耗原理和方法2

1。2。2 减少输出功率原理和方法3

1。3 本文节能方案的方法3

第二章  几种实用扶梯节能方式介绍及对比4

2。1 扶梯机械结构及工作原理介绍4

2。2 几种实用的扶梯节能方式介绍4

2。2。1 节能器调压法4

2。2。2 “无人停梯”模式6

2。2。3   —Y 切换法7

2。2。4 变频模式7

2。2。5 能量回馈制动模式8

2。3 本文解决方案的优势9

第三章  交流变频调速原理和变频器控制方式·10

3。1 交流变频调速原理·10

3。1。1 基速以下恒转矩调速·10

3。1。2 基频以上恒功率调速·12

3。2扶梯变频调速方案原理选择13

3。3 变频器分类·13

3。4 变频器控制方式·14

第四章  共直流母线传动系统组成和原理·16

4。1 传动系统组成·16

4。2 传动系统原理·17

第五章  扶梯节能系统设备选型及硬件设计·18

5。1 变频器选型设计·18

5。1。1 变频器类型·18

5。1。2 变频器容量计算·18

5。1。3 变频器安装、冷却方式要求18

5。1。4 其他合理要求·19

5。2 电机模块硬件电路设计·19

5。3 传动系统硬件结构设计·21

第六章  扶梯节能系统算法及程序设计·23

6。1 变频7段速调速节能算法·23

6。2 扶梯节能控制系统软件设计·23

第七章  基于共直流母线传动技术的扶梯多段速变频调速能耗计算·31

7。1 扶梯能耗计算公式推导·31 PLC智能信息处理的扶梯节能控制系统设计+梯形图:http://www.youerw.com/zidonghua/lunwen_92371.html

------分隔线----------------------------
推荐内容