毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

STC89C51单片机的烘箱温度控制设计+程序+电路图

时间:2022-02-26 19:21来源:毕业论文
以STC89C51单片机为基础所设计的烤箱温度控制系统,该系统主要包括了硬件设计和软件设计。本文重点论述硬件部分和软件部分的设计思路和设计原理,并且采用模块化的设计思想

摘 要:电子技术的发展给整个社会带来了日新月异的变化,单片机的运用也愈加的广泛起来。温度控制在工业化大生产中是经常出现的技术,有时温度控制直接影响了产品的质量。随着西餐引入,越来越多的家庭也将烤箱纳入了厨房用品系列,而许多烘箱的设计都涉及单片机。本文介绍了以STC89C51单片机为基础所设计的烤箱温度控制系统,该系统主要包括了硬件设计和软件设计。本文重点论述硬件部分和软件部分的设计思路和设计原理,并且采用模块化的设计思想,把整个系统分成若干个模块,各个模块之间既有联系又相互独立。硬件部分有单片机电路模块、温度控制模块和温度检测模块。在温度检测模块,介绍了PT100热敏电阻传感器和A/D转换电路模块。软件部分对于各模块以及各模块的程序做了介绍并且给出流程图。在文章最后,运用了Proteus结合Keil软件对整个系统进行了仿真并且做出总结。78293

毕业论文关 键 词:单片机,电烤箱,温度控制

Abstract: Electronic technology development to the whole of  society has brought rapid changes and MCU are used more and more widely。 The temperature control in industrial production often appear。 Sometimes temperature control is a direct impact on the quality of products。 With the introduction of western style food, more and more families will also incorporate into the oven kitchenware series。 And many of the oven design are related to SCM。 This paper introduces the STC89C51 microcontroller based on the design of the oven temperature control system。 The system mainly includes the hardware design and software design。 The emphasis discusses the hardware part , the software part of the design thinking and design principle。 With the use of modular design, the whole system is pided into several modules。 Between each module is connected and mutually independent。 Hardware part is the SCM circuit module, temperature control module and a temperature detection module。 In the temperature detection module, the paper introduces the thermistor sensor PT100, A / D conversion module circuit。 Software for each module and each module processes the introduction and flow chart is given。 At the end of the paper, the paper use the Proteus and keil software of the whole system simulation to debug and make a summary。

Keywords: single chip microcomputer, electric oven, temperature control

目录

1 前言 4

1。1 国内外电烤箱的现状及发展趋势 4

1。2 该设计的目的和意义 4

2 系统设计 5

2。1 系统总体设计思想 5

2。2 系统设计的技术指标 5

2。3 系统设计框图 5

3 硬件设计 6

3。1 单片机电路 6

3。2 温度检测电路 8

3。3 温度控制电路 11

4 软件部分设计 12

4。1 主程序设计 13

4。2 A/D转换程序设计 15

4。3温度控制程序设计 15

4。4报警程序设计 16

5 系统仿真 17

结  论 19

参 考 文 献 20

致  谢 21 STC89C51单片机的烘箱温度控制设计+程序+电路图:http://www.youerw.com/zidonghua/lunwen_90201.html

------分隔线----------------------------
推荐内容