毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

PLC基于触摸屏的蒸发器监控系统设计

时间:2017-06-08 15:43来源:毕业论文
论文设计了串级PID分程控制方案。方案选定后,我在Wincc flexible系统中进行软件的编辑,包括各个监控界面的切换。监控中的画面包括:主画面,工艺流程画面,参数管理画面,报警画面

摘要:人机界面(HMI)提供了透明性,HMI是人(操作员)与过程(机器/设备)之间的接口。 PLC 是控制过程的实际单元。因此,在操作员和 WinCC flexible(位于 HMI 设备端)之间以及 WinCC flexible 和 PLC 之间均存在一个接口,我们可以在此进行实时监控, HMI系统承担下列任务:过程可视化,显示报警,过程值和报警记录,过程和设备的参数管理
首先结合控制要求,通过分析蒸发器的工艺流程,本论文设计了串级PID分程控制方案。方案选定后,我在Wincc flexible系统中进行软件的编辑,包括各个监控界面的切换。监控中的画面包括:主画面,工艺流程画面,参数管理画面,报警画面等。当完成软件编辑以后,就进行硬件上的连接并进行调试。9865
关键词:  PLC;监控;蒸发器
Based on the touch screen monitor and control system design of evaporator
Abstract:Human-machine interface (HMI) provides transparency, HMI is a person (the operator) and process (machine/equipment) between interfaces. PLC is to control the process of actual unit. As a result, the operator and WinCC flexible (located in the HMI device side) and between WinCC flexible and has an interface between PLC, we can real-time monitoring in the field, and undertake the following tasks: HMI system, visual display alarm, process value and the alarm records, process parameters and equipment management.
First based on control requirements, through the analysis of the technological process of evaporator, this paper design the cascade PID process control plan. Scheme is selected, I am in Wincc flexible system for editing software, including the monitoring interface of the switch. Monitoring the pictures include: the main frame, technological process, parameter management screen, alarm screen, etc. After as editing software, hardware connection and debugging.
Key words: PLC;monitoring;the evaporator
目 录
1 绪论    1
1.1 课题的研究背景及意义    1
1.2 基于触摸屏蒸发器系统的重要性    1
2 蒸发器对象分析    2
2.1 蒸发器对象工艺流程描述    2
2.2 蒸发器工艺流程介绍    3
2.3 蒸发器任务控制要求    3
2.4 蒸发器特性分析    3
2.5 被控参数特性分析    4
3 蒸发器控制方案    6
3.1 蒸发器液位控制系统    6
3.1.1 控制方案    6
3.1.2 调节阀选型    6
3.1.3 控制器正反作用确定    6
3.1.4 控制规律选择    6
3.2蒸发器温度控制系统    7
3.2.1 控制方案    7
3.2.2 调节阀选型    7
3.2.3 控制器正反作用确定    7
3.2.4 控制规律选择    8
3.3 浓缩液出口流量控制系统    8
3.3.1 控制方案    8
3.3.2 调节阀选型    8
3.3.3 控制器正反作用确定    8
3.3.4 控制规律选择    9
3.4 开车顺序控制    9
4 基于触摸屏控制的软件设计    10
4.1 设计的技术要求    10
4.2 监控界面要求    10
4.3 人机界面触摸屏的基本知识    10
4.3.1  SIMATIC HMI的概述    10
4.3.2  wincc flexible 系统概述    11
4.4 系统画面的设计    12
4.4.1 初始画面    12
4.4.2 监控主画面    13
4.4.3 运行状态画面    14
4.4.4 用户管理界面    17
4.4.5 报表画面    21 PLC基于触摸屏的蒸发器监控系统设计:http://www.youerw.com/zidonghua/lunwen_8740.html
------分隔线----------------------------
推荐内容