毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

STC89C51单片机的档案馆温度湿度监测系统设计+电路图+程序

时间:2021-10-30 10:15来源:毕业论文
基于单片机的档案馆温湿度系统,能够有效地监测档案馆的温湿度,同时将当前温度和湿度显示在LCD12864液晶屏上,方便管理人员的记录,同时,当温湿度偏离规定值时,该系统能够进行

摘要:档案是人类宝贵的财富,目前很多城市都采用纸质档案。档案室的温湿度严重影响着档案的使用年限,所以监测档案室的温湿度成为了非常重要的一件事。本课题设计了基于单片机的档案馆温湿度系统,能够有效地监测档案馆的温湿度,同时将当前温度和湿度显示在LCD12864液晶屏上,方便管理人员的记录,同时,当温湿度偏离规定值时,该系统能够进行报警,通知管理人员及时采取措施。该系统不仅可以应用到档案馆,还可以应用到图书馆、储存室等地点。73571

关键词:单片机,温湿度,监测

Abstract:Archives are the precious wealth of human beings。 At present, many cities are using paper files。 The temperature and humidity of the record room seriously affect the service life of the file, so it is very important to monitor the temperature and humidity of the record room。 The curriculum design based on MCU archives temperature and humidity system can effectively monitor the temperature and humidity of the archives, and the current temperature and humidity display LCD12864 LCD screen, convenient management personnel records, at the same time, when the temperature and humidity deviate from the prescribed value, the system can reach alarm, notify management personnel promptly wiped measures。 The system can not only be applied to the archives, but also can be applied to the library, storage room, etc。。 

Key words: single chip microcomputer, temperature and humidity, monitoring 

目   录

1 绪论 4

1。1 课题研究背景及意义 4

1。2 温湿度监控的发展 4

1。3 本论文的主要内容及章节安排 4

2 系统方案设计 5

2。1 系统需求分析 5

2。2 系统方案设计 5

3 系统硬件设计 6

3。1 单片机最小系统 6

3。1。1 单片机的选择 6

3。1。2 时钟电路设计 8

3。1。3 复位电路设计 9

3。2 传感器电路设计 10

3。2。1 温湿度传感器的选择 10

3。2。2 温湿度传感器接口电路设计 11

3。3 液晶显示电路设计 12

3。3。1 LCD的选择 12

3。3。2 LCD接口电路设计 13

3。4 报警电路设计 14

3。5 串行口电路设计 14

3。6 系统整体设计 16

4 系统软件设计 17

4。1 Keil3简介 17

4。2 Protel99se简介 18

4。3 主程序设计 19

5 系统测试与分析 20

5。1 测试方案 20

总  结 22

参考文献 23

致  谢 24

附件一:实物图 STC89C51单片机的档案馆温度湿度监测系统设计+电路图+程序:http://www.youerw.com/zidonghua/lunwen_83958.html

------分隔线----------------------------
推荐内容