毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

电压源高频链三电平逆变器的研究

时间:2017-05-25 19:01来源:毕业论文
论文首先介绍了逆变器和多电平变换器的国内外的发展与现状,然后提出了并深入研究了电压源高频链三电平逆变器,该变换器是由全桥三电平逆变器,高频变压器,周波变换器以及输

摘要本论文首先介绍了逆变器和多电平变换器的国内外的发展与现状,然后提出了并深入研究了电压源高频链三电平逆变器,该变换器是由全桥三电平逆变器,高频变压器,周波变换器以及输出滤波器组成。电压源三电平高频链逆变器具有高频电气隔离、功率器件电压应力低、变换级数少等优点。本文主要针对电压源高频链三电平逆变器的电路拓扑、控制技术、工作原理、关键电路参数等进行分析和设计。在此基础上,利用matlab软件对电压源三电平高频链逆变器进行仿真验证。仿真结果验证了该电路的正确性。9100
关键字: 电压源型  高频链  三电平  逆变器
毕业设计说明书(论文)外文摘要
Title:voltage source of three level high frequency converter
Abstract
This paper first introduced the development and current situation of inverter and multilever converter at home and abroad ,and then puts forward the voltage source of  three level high frequency converter, The kind of circuit topologies are constituted of full bridge three-level inverter, high frequency transformers, frequency converter and output filter . The converter has the advantages such as simple topology, two-stage power conversions(LFAC/HFAC/LFAC), bidirectional power flow, high frequency electrical isolation and so on. This article mainly analysis and design the circuit topology, control technology, working principle, key circuit parameters of the three level high frequency converter . on the basis of that.this paper establishes the simulation model by using simulation software matlab . The results of simulation shows that the circuit topology is right.
Key word : voltage source  high frequency  three-level converter  DC/AC
 
目    录
第一章 绪论
1.1逆变器技术简介1
1.2逆变器的应用领域1
1.3逆变器技术的发展过程与现状3
1.4逆变主电路的基本形式和分类4
1.4.1 电压源型逆变器5
1.4.2电流源型逆变器.6
1.4.3 电压源型逆变器和电流源型逆变器的对偶性6
1.5现代逆变技术的概念与研究内容7
1.6 本文的主要研究意义和研究内容8
   1.6.1本文所研究的意义.8
   1.6.2本文所研究的主要内容.8
第二章 全桥三电平高频链逆变器技术基础
2.1多电平逆变器优势国内外现状.9
2.2三电平逆变器电路拓扑和工作原理.10
   2.2.1二极管箱位型三电平逆变器.10
   2.2.2飞跨电容型三电平逆变器.13
   2.2.3级联型多电平逆变器.15
2.3传统逆变技术综述.17
   2.3.1传统逆变技术基本概念及不足.17
   2.3.2 高频链逆变技术概念的提出18
2.4高频链逆变技术的分类.19
   2.4.1 电压源型高频链逆变器19
   2.4.2 电流源型高频链逆变器20
2.5 高频链逆变电源现状与发展趋势.21
第三章  电压源型高频链三电平逆变器主电路拓扑与原理特性
 
3.1 高频链三电平逆变器的电路拓扑21
3.2 高频链三电平逆变器的工作过程22
3.3 周波变换器的电路拓扑及工作过程27
3.4 滤波器的电路拓扑及滤波原理28
3.5 参数设计.30
3.5.1 整流二极管的选取.30
3.5.2 分压电容的选取.30
3.5.3 箝位二极管的选取.30
3.5.4 功率开关管的选取.31
3.5.5 变压器参数设计.31
3.5.6周波变换器开关管的选择33
3.5.7 滤波器的设计.34
第四章 控制电路的设计与实现
4.1 控制电路原理与设计34
4.2 控制回路的具体实现35
4.2.1采样点路35
4.2.2 比较求差路.35
4.2.3 PID调节电路36 电压源高频链三电平逆变器的研究:http://www.youerw.com/zidonghua/lunwen_7834.html
------分隔线----------------------------
推荐内容