毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

MATLAB分布式火控系统航路滤波演示平台软件设计

时间:2018-11-16 11:04来源:毕业论文
以分布式火控系统为研究对象,针对在防控火控系统下生成的典型目标航路和卡尔曼滤波进行研究,旨在典型航路生成中,对目标的位置进行卡尔曼滤波处理从而推算出其最佳位置

摘要在现代战争背景下,防空战已然成为作战的主要形式之一,世界各国防空系统均采用导弹防空与高炮防空相结合的形式。本文以分布式火控系统为研究对象,针对在防控火控系统下生成的典型目标航路和卡尔曼滤波进行研究,旨在典型航路生成中,对目标的位置进行卡尔曼滤波处理从而推算出其最佳位置。本课题使用MATLAB软件进行GUI设计,使所生成的目标航路及滤波结果,可以按要求进行操作和存储,并能以图形方式直观展示。经数据对比,本课题所设计生成的典型航路以及滤波后的结果满足精度要求,可以成功的生成目标航路并能推算出目标的最佳位置。30294
关键词 典型目标航路  分布式火控系统  卡尔曼滤波
毕业论文设计说明书外文摘要
Title  The software design of the route filtering demonstration   platform for distributed fire control system          
Abstract
Under the background of modern warfare, anti air warfare has already become one of the main forms of combat, air defense system all over the world were treated with combination of antiaircraft missile and anti-aircraft gun. The distributed fire control system as the research object, generated in the prevention and control of fire control system typical target route and Kalman filter for research, aimed at the typical route generation, the target location of filtering and calculate the optimum location. This paper uses MATLAB software for GUI design, so that the generated target route and filtering results can be operated and stored according to the requirements, and can be visually displayed graphically.. By comparison of data, the typical route and the result of the filter are satisfied with the accuracy of the results, and the target can be generated successfully and the best position can be calculated.
Keywords    typical target route  distributed fire control system  kalman filter
目 次
1  绪论    1
1.1 课题研究的背景及意义    1
1.2 国内外研究现状    1
1.3 论文研究内荣    2
1.4 论文章节安排    3
2  分布式火控系统航路滤波算法基础    4
2.1 分布式火控系统概述概述    4
2.2滤波模型及算例分析    6
2.3本章小结    7
3  滤波演示平台软件总体设计    8
3.1  软件需求分析    8
3.2 软件总体构架    8
3.3 软件功能及任务规划    9
3.4 本章小结    9
4  滤波演示平台软件详细设计    10
4.1 详细设计思路    11
4.2 软件功能模块详细设计    12
4.3 本章小结    14
5  滤波演示平台软件调试分析    15
5.1 软件调试概述    15
5.2 功能模块调试    15
5.3 滤波算例演示    17
5.4 算例演示验证    23
5.5 本章小结    30
结论    31
致  谢    32
参考文献    33
1 绪论
1.1 课题研究的背景及意义
众所周知,近年来空袭和反空袭是未来战争的主要表现形式。同时,我国地域辽阔,预警机制难以完备,应该建立确保对突防成功的目标有切实的防御能力;在我国山区分布极为宽广,城市也越来越发达,高层建筑也渐渐增加,使得视野变得非常的小,如果依旧依靠直描的导弹是很难完成在低空近程环境下的反导任务。有关研究结果表明,在近程防空中,高炮因其具有高射速、高机动性、反应时间短等特性具有不可替代的作用,高炮与导弹具有互补性。在防空作战中,对目标有效识别、跟踪是后续射击、毁伤的前提条件。分布式火控系统目标跟踪设备与武器终端分散配置,而有效、平稳地跟踪目标,航路滤波模块是必不可少的。 MATLAB分布式火控系统航路滤波演示平台软件设计:http://www.youerw.com/zidonghua/lunwen_25939.html
------分隔线----------------------------
推荐内容