毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

NX/MoldWizard的电脑散热板热流道注塑模具设计+CAD图纸

时间:2021-08-01 11:39来源:毕业论文
通过使用NX/Mold Wizard向导模组,对产品采取了材料特性及成型工艺的分析、塑件分模设计、模架设计、热流道浇注设计、顶出系统设计、冷却水路设计,绘制成型零件二维图及模具装配图

摘要:模具工业对经济和社会的发展有着重要的推进作用,加工产业中广泛运用着多种多样的模具,其中注塑产品因其质轻,物美,在生活中应用广泛,在模具产业中发展迅速。随着技术的发展和对产品质量的追求,相对比冷流道注塑,热流道技术具有节约原料,提升注射的质量和缩短成型周期的特点,同时我国在热流道的使用趋于上升和发展阶段,越来受到人们的重视,对于模具工业自身发展有着积极的推广和发展作用。本设计通过使用NX/Mold Wizard向导模组,对产品采取了材料特性及成型工艺的分析、塑件分模设计、模架设计、热流道浇注设计、顶出系统设计、冷却水路设计,绘制成型零件二维图及模具装配图。通过分析计算,解决制件自身多处复杂倒扣,并进行模流分析,校核产品设计。塑件本身存在许多侧抽芯和镶件机构,可以从NX标准件库里面调出适合自己毕业设计的机构类型。完成合理的模具设计之后,按照国家制图标准使用AutoCAD绘制二维装配图、型芯和型腔图、重要成型零件图等。70109

毕业论文关键词: 注塑模模具;NX/Mold Wizard;热浇道

Computer heating plate of hot runner injection mold design based on NX/Mold Wizard

Abstract: Die and mold industry on economic and social development has an important role in the promotion and processing industry widely used a variety of mold, which injection molding products for its light quality, light, in life widely used, in the mold industry rapid development. With the development of technology and the pursuit of the quality of the products, relative than the cold runner injection, hot runner technology has saving raw materials, improve the quality of injection and shorten the molding cycle etc., at the same time, our country in the application of hot runner tends to rise and development stage, more to receive people's attention, for the development of the mold industry itself has a positive role in the promotion and development. The design by using NX/Mold Wizard module, material properties and forming process analysis of product, plastic parts mold design, mold design, hot runner design, top of the design of the system, and the cooling water, drawing forming part 2D drawing and mold assembly drawing. Through analysis and calculation, to solve many complex parts itself upside down, and mold flow analysis, optimization of product design.This subject has complex structure, many aspects need to consider The plastic part itself has many side core pulling and insert piece mechanism, which can be transferred from the NX standard parts library for their graduation design organization type. After the completion of the mold design is reasonable, according to the national standard drawing using AutoCAD drawing 2D assembly, core and cavity maps, important molding drawing.

Key words: Injection Mold Design;NX/Mold Wizard;Hot Runner

目  录

绪论1

1  塑件成型工艺性分析2

1.1  塑件分析 2

1.2  塑件材料分析3

1.3  ABS的注射成型过程及工艺参数3

1.3.1  注射成型过程3

1.3.2  注射工艺参数4

2  确定模具的结构和选择注射机5

2.1  分型面位置的确定5

2.2  型腔数量和排位方式的确定6

2.2.1  型腔数量的确定6

2.2.2  型腔排位的确定6

2.3  注射机型号的确定6

2.3.1  注射量的确定6

2.3.2  浇注系统凝料体积的初步估算7

2.3.3  选择注塑机7

2.3.4  注射机的相关参数校核8

3  浇注系统的设计10

3.1  浇口位置的确定10

3.2  流道的设计11

4  成型零件13

NX/MoldWizard的电脑散热板热流道注塑模具设计+CAD图纸:http://www.youerw.com/jixie/lunwen_79270.html
------分隔线----------------------------
推荐内容