摘要本文主要是针对口径为155mm的炮射侵彻弹的弹丸设计以及侵彻分析。首先要完成弹丸的外形结构设计以及内腔结构设计，设计要符合射程，侵彻的弹丸基础结构。运用计算机绘图软件建模拟合出弹丸的结构特征量。将得到的的结构特征量带入到后面的计算中去校核。如果弹丸的结构与所要求的标准不适合，就需要再次返回重新完成弹丸的外形结构设计以达到符合要求。发射时强度的计算主要是校核弹丸的壁厚以及完成对于部分结构所需要的材料的确定。飞行稳定性的计算主要是校核弹头部的长度、质心位置以及转动惯量是否合理。30799
在确定弹丸的结构设计之后，需要对其的外弹道进行分析计算，以求出弹丸的射程、弹道高、落速、落角。如果有参数不满足要求，需要重新返回到弹丸的飞行稳定性计算去校核。
在对弹丸的侵彻能力分析中，由弹丸的外弹道分析计算得出落速、落角计算弹丸的侵彻深度。本文主要是使用别列赞公式计算粘土，砖填物，混凝土的侵彻深度，以及一些侵彻分析混凝土。
关键词  侵彻弹  飞行稳定性  外弹道   混凝土
毕业论文设计说明书外文摘要
Title    Artillery Penetrator design and penetration capability analysis                                               
Abstract
This article is designed for projectiles caliber 155mm artillery projectile penetration, and penetration analysis.First, the shape of the projectile to complete structural design and cavity design, design to meet the infrastructure caliber projectile, length and quality.Using computer graphics software modeling fitting structure of the projectile amount.Feature amount into the structure of the resulting calculations go back to check.If the structure of the projectile with the required standards are not fit, you need to return again to re-shape the structure of the complete projectile designed to achieve compliance.Calculation of the emission intensity of the main check for completion of the projectile and the wall thickness of the material required for the part of the structure is determined.Flight stability calculation is to check the length of the main portion of the warhead, the centroid position and the moment of inertia is reasonable.In determining the structural design of the projectile after it was required external ballistics analysis and calculation, in order to a range of projectiles, high trajectory, falling speed, impact angle.With a parameter does not meet the requirements, the need to return to flight of the projectile to check the stability of the calculation.In the analysis of the penetration capability of the projectile, the projectile Trajectory analysis calculated the fall velocity projectile drop angle calculating penetration depth.This article is calculated using Berezan clay, brick fill material, concrete penetration depth, and some penetration analysis.
Keywords  Penetrator  Flight stability  Trajectory  Concrete
 目   次
1  引言（或绪论）    1
1.1  研究的意义    1
1.2  理论分析方法    1
1.3  研究历史简介    2
1.4  本课题研究的主要内容    3
2  155MM炮射侵彻弹总体结构设计方案4
2.1  弹丸的外形结构    4
2.2  弹丸的定心部和弹带    6
2.3  弹丸的内腔结构    7
3  155MM炮射侵彻弹发射强度校核    9
3.1  155mm炮射侵彻弹发射时弹体应力    9 炮射侵彻弹的设计与侵彻能力分析:http://www.youerw.com/jixie/lunwen_26739.html