毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

某变初速发射装置设计与分析

时间:2018-10-22 20:30来源:毕业论文
确定了弹丸非致命杀伤的打击动能和比动能,再通过外弹道计算,分别得到20m、40m、60m、80m处实现非致命打击的弹丸初速;建立新的内弹道模型和软件程序,计算分析泄气孔的位置、大

摘要本文设计了一种利用弹丸在膛内运动时泄出部分火药气体来减小膛压,从而实现改变弹丸初速的发射装置,该装置能够调节弹丸初速,实现不同距离的非致命杀伤。
通过查阅文献,确定了弹丸非致命杀伤的打击动能和比动能,再通过外弹道计算,分别得到20m、40m、60m、80m处实现非致命打击的弹丸初速;建立新的内弹道模型和软件程序,计算分析泄气孔的位置、大小、泄气室的容积。根据这些参数,设计了泄气装置的具体结构;再根据机械设计原理,设计了不同距离不同的泄气量的开关;最后建立了三文模型。29461
关键词  变初速 发射装置 非致命 内弹道 泄气孔
毕业论文设计说明书外文摘要
Title    A variable velocity launcher design and analysis                     
Abstract
This paper designed a launcher which can change the muzzle velocity of projectile by revealing part of the gunpowder gas to reduce the chamber pressure when the projectile motion in the chamber. the device can adjust the muzzle velocity, and different distance of deadly killer.
The deadly killer from kinetic energy and specific kinetic energy is based on the literature; then through the outer ballistic calculation, respectively obtained the muzzle velocity of deadly killer in 20m、40m、60m and 80m place;Then set up a new ballistic model and software program,  we calculated and analyzed the bleeder port’s location, size, and the volume of frustrated chamber. According to these parameters, I designed the specific structure of frustrated device; Then according to the principle of mechanical design, designed the switch of the amount of the different distance of frustrated. At last, I established the three-dimensional model。
Keywords: variable muzzle velocity,launcher,the deadly killer,interior ballistic, bleeder port
目   次
1  绪论1
1.1  研究背景及意义1
1.2  国内外发展现状1
1.3  本文的工作内容2
1.4  变初速方案分析3
2  非致命杀伤阀值与外弹道计算4
2.1 非致命杀伤判据4
2.2  外弹道计算7
3  变初速发射装置内弹道模型与分析13
3.1  变初速发射基本原理13
3.2  内弹道数学模型13
3.3  内弹道解算16
3.4  内弹道计算结果17
4  变初速装置的设计19
4.1  变初速发射装置总体方案19
4.2  变初速发射装置方案(一)组成及工作原理20
4.3  变初速发射装置的相关部件设计23
4.4  变初速发射装置方案(二)32
结论 34
致谢 35
参考文献36
1  绪论
1.1  研究背景及意义
随着时代的发展,科技的进步,经济的提升,现代战争模式的改变,对自动武器的要求也越来越苛刻。二战结束后,发生大规模战争的可能性小,军、警参与“文护和平”以及“非战争行动”日益增多;同时,世界呼唤和平,呼唤人道主义的呼声高涨,用于消弱或控制敌方战斗力的非致命武器得到各国的亲睐[1]。自动武器要实现非致命要求,则要减少初速,或者采用小口径,从而实现降低动能和比动能;但是自动武器又不能丢掉其本身的特殊性,当国家受到侵犯,自身生命受到威胁时,能够保家卫国,保护自身、家庭成员的安全。因此必须实现自动武器杀伤力的可控性才能更好的适应时代的发展;既实现弹丸初速的可控、可调。
课题源于变初速、变威力发射技术以及非致命定效杀伤技术领域,围绕自动武器采用新型发射装置展开研究,以实现自动武器致命与非致命的两种发射模式。 某变初速发射装置设计与分析:http://www.youerw.com/jixie/lunwen_24725.html
------分隔线----------------------------
推荐内容