毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

反后坐装置动态加载试验台设计液压驱动装置设计

时间:2018-04-08 23:34来源:毕业论文
通过分析计算确定液压元件,最后进行系统校核。在对液压系统具体的分析和对液压理论基础掌握的前提下,设计液压系统的调速与循环方式和供油方案

本文介绍了液压系统的组成用途及应用发展,结合课题要求,对液压系统进行全面的方案设计。主要包含液压系统各个工况负载参数,液压主要元件参数,基本回路的选择。通过分析计算确定液压元件,最后进行系统校核。在对液压系统具体的分析和对液压理论基础掌握的前提下,设计液压系统的调速与循环方式和供油方案。再根据工况选择适合的基本回路并将回路综合组成液压系统,之后确定各个位置的液压标准元件,使最终设计出来的液压系统能控制反后坐装置人工后坐和气缸推回,满足动作循环要求。20760
关键词 :液压系统  液压基本回路  液压元件  动作循环
毕业论文设计说明书(论文)外文摘要
Title Reverse recoil device of dynamic loading test bench——
Hydraulic driving device design
Abstract
This paper focus on the application and development of hydraulic system. According to the requirements of the subject,a all-round designation of the hydraulic system is made which mainly includes determining the load parameter of different working situations, calculating main parameters of hydraulic components, and selecting appropriate basic loop. Firstly, according to those parameters, we chose proper components and conducted a final check to make sure their effectiveness. Secondly, based on the analysis of the hydraulic system and the understanding of hydraulic theory, we designed the hydraulic pressure system, circulation and supply scheme. Thirdly, according to the basic circuit in different working conditions, we put hydraulic circuits together to make the hydraulic system. Then,we determined the location of each hydraulic components. In the end,we ensured the final designation of the hydraulic system could control the recoil mechanism artificial recoil and back into the cylinder, and satisfy the requirements of the action cycle.
Key:hydraulic system, basic hydraulic circuit, hydraulic components,action cycle
目次
1 绪论    1
1.1 研究背景与意义    1
1.2 液压驱动装置优缺点    1
1.3 国内外发展概况    2
1.4 液压驱动装置设计的目的    3
1.5 液压驱动装置设计的内容和要求(包括原始数据、技术要求、工作要求等)    3
1.6 已知条件    4
2 运动负载分析    5
2.1 外负载分析    5
2.2 惯性负载分析    5
2.3 阻力负载分析    5
2.4 各个阶段负载分析    5
3 执行元件主要参数的确定    7
4 液压系统方案的设计和液压系统原理图的拟定    10
4.1 液压系统方案的设计    10
4.2 基本回路的选择    11
5 液压元件的选择    14
5.1 液压泵的选择    14
5.2 阀类元件的选择    15
6 油管的计算    20
7 油箱容积的设计    22
8 液压系统性能验算    23
8.1 系统压力损失验算并确定压力阀调整值    23
8.2油液温升计算    25
结论    27
致谢    28
参考文献    29
1 绪论
1.1 研究背景与意义
火炮是人类武器发展历史上出现最早的热兵器,今天在各种高新技术的装备中,它仍然是各军兵种的主要火力手段[1]。在火炮技术发展的几个世纪的漫长岁月中,火炮威力与机动性的发展一直是贯穿整个火炮设计的矛盾斗争。而反后坐装置就是这一基本矛盾的产物,火炮上有无反后坐装置是区别火炮是刚性炮架还是弹性炮架的标志[2,3]。 反后坐装置动态加载试验台设计液压驱动装置设计:http://www.youerw.com/jixie/lunwen_12655.html
------分隔线----------------------------
推荐内容