毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

聚烯烃和聚碳酸亚丙酯共混物的性能研究

时间:2020-01-19 16:21来源:毕业论文
通过哈克转矩流变仪熔融共混法制备PP/PPC以及HDPE/PPC的共混物,在PPC中加入HDPE或PP提高了PPC的强度和模量。分别研究增容剂BF与EVM对共混物力学性能的影响

摘要聚碳酸亚丙酯(PPC)是一种可完全生物降解的环保聚合物, 具有可降解性和生物兼容性,与其它聚酯相比,价格低廉。高密度聚乙烯(HDPE)和聚丙烯(PP)是两种通用塑料,无毒、质轻、具有良好的力学性能。本文通过哈克转矩流变仪熔融共混法制备PP/PPC以及HDPE/PPC的共混物,在PPC中加入HDPE或PP提高了PPC的强度和模量。分别研究增容剂BF与EVM对共混物力学性能的影响,并对力学性能优异的PP/PPC体系进行进一步的研究,当 m PPC:m PP 为70∶ 30 时, 增容剂BF、EVM的最优用量分别为PPC 和 PP 总质量的 1%、 3%, 在最优用量下 PPC/增容剂/PP 共混物材料的的屈服强度分别为11.8MPa、14.5MPa,较不添加增容剂的共混物分别提高了1.9MPa和4.6MPa。这项工作的结果,为环境友好高分子材料PPC的大量应用提供新的可能性。44246

Abstract Poly (propylene carbonate) (PPC) is an completely environmental friendly biodegradable polymer with biodegradable and biocompatible, compared with other polyesters, It has low prices。High density polyethylene (HDPE) and polypropylene (PP) are two common plastics with non-toxic and light weight, It has good mechanical properties.The PPC/PP and PPC/HDPE blends were prepared by melt-blending in a batch mixer for the first time. By adding HDPE or PP in PPC to improve PPC’s strength and modulus.What’s more, we investigate the influence of  adding two compatibilizers BF and EVM to blendings.Then we do more research in the serial PP/PPC blendings which already with well mechanical properties.when PPC:PP is 70:30, the best dosage of BF is 1% and  EVM is 3% campared with the total mass of PPC and  PP. The yield strength of the  PPC / BF/ PP blend material is 11.8MPa, as the PPC / EVM/ PP blend material  is 14.5MPa, which are 1.9MPa and 4.6MPa higher than those of the unmodified PPC/pp blends, respectively. The results of this work  offers new possibilit for the large number of applications of environment-friendly polymer materials PPC .

毕业论文关键词:聚碳酸亚丙酯; 聚丙烯; 高密度聚乙烯;增容剂;共混

Keyword: PPC; PP; HDPE;compatibilizer;blending

目  录

1、 引言 4

2、实验 7

2.1主要原料与仪器 7

2.1.1主要原料 7

2.1.2仪器 8

2.2样品制备 8

2.3分析与测试 9

3、结果讨论 9

3.1拉伸性能 9

3.2形貌 14

3.2.1 PP-PPC共混体系形貌 14

3.2.2 HDPE-PPC共混体系形貌 16

3.3热分析 17

3.3.1 DSC分析 17

3.3.2 DMA分析 19

4 结论与讨论 20

1、引言

发展新材料产业已被国家“十二五”规划单列为优先发展的高技术产业之一。众所周知,传统高分子材料在给人类带来巨大物质财富的同时,也带来了严重的资源浪费和环境负荷等问题。随着人们对人类生存环境的日益重视,传统高分子材料所带来的环境污染问题已开始受到广泛关注。另一方面,有限的石油也迫使人们着力研究可替代资源。因此,不依赖石化资源、可生物降解、节能环保的绿色高分子材料符合人与自然和谐发展的基本要求,其开发和应用受到世界范围的广泛关注,是当前高分子材料科学中最为活跃的研究领域之一;是高分子材料产业可持续发展的必由之路。 聚烯烃和聚碳酸亚丙酯共混物的性能研究:http://www.youerw.com/huaxue/lunwen_45471.html

------分隔线----------------------------
推荐内容