毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

年产12万吨MTBE甲基叔丁基醚装置生产工艺设计+CAD图纸

时间:2017-02-06 08:48来源:毕业论文
设计是年产12万吨甲基叔丁基醚装置生产工艺设计,采用的合成工艺是由混合碳四中的异丁烯和甲醇在强酸性苯乙烯系阳离子交换树脂催化剂上进行反应最终合成MTBE

摘要:本设计是年产12万吨甲基叔丁基醚装置生产工艺设计,主要以反应工段为工艺设计对象,在借鉴了国内外成熟的MTBE生产工艺和技术的基础上,结合了吉林市地区的自然及其地理条件,按任务要求生产量设计本工艺流程。由于我国目前是世界上汽油消耗量相当大而且用量正在大量增加的国家,而采用甲基叔丁基醚作为汽油添加剂,有提高汽油烷值和汽油燃烧效率、减少CO和其他有害物(如臭氧、苯、丁二烯等)的排放等优点,因此建设此项目具有重要意义。我采用的合成工艺是由混合碳四中的异丁烯和甲醇在强酸性苯乙烯系阳离子交换树脂催化剂上进行反应最终合成MTBE。此次设计采用的技术虽不是业内最先进的,但是就我国目前的实际状况来讲是最成熟的。5492
关键词: 甲基叔丁基醚;异丁烯;甲醇
An annual output of 120,000 tons of isobutylene methanol to methyl tert-butyl ether process design
Abstract:The design is an annual output of 12,0000 tons of methyl tertiary butyl ether plant process design,mainly to reflect the target section for the process desig and drawing at home and abroad sophisticated MTBE production techniques, combined with the City of its natural and geographical conditions , according to mandate design requirements of the production process. Since China is currently the world's gasoline consumption is significant and substantial increase in the amount of state, MTBE as a gas additive to increase the n-value gasoline and gasoline combustion efficiency and reduce CO and other harmful substances (such as ozone, benzene, butadiene, etc.) emissions, etc,therefore of great significance to the project construction.We use the Synthesis of carbon from the mixed four of the isobutylene and methanol in the strong acid styrene cation exchange resin catalyst, the reaction on the final synthesis of MTBE.Although not the design technology used is the industry's most advanced, but on our current terms of the actual situation is the most mature.
Key Words: Methyl tert-butyl ether ; Isobutene ; Methanol
目  录
1 概述… 1
1.1 甲基叔丁基醚生产工艺及设计意义 1
1.1.1 概述  1
     1.1.2 MTBE生产历史和生产前景… 1
1.1.3 设计依据 2
   1.2 工艺说明 5
1.2.1 原材料规格… 5
1.2.2 安全标准 6
1.2.3 产品性质 7
1.2.4 进料空气 8
2 工艺流程设计… 9
  2.1 工艺路线及其基本原理 9
  2.2 生产控制说明及控制项目 14
  2.3 工业安全 14
  2.4 生产控制 16
  2.5 三废处理 16
3 厂区设计  17
  3.1 概述…17
  3.2 厂址选择 17
  3.3 设计地区自然条件17
  3.4 车间组成及结构…17
  3.5 设备布置简述18
  3.6 车间定员 18
  3.7 厂区布置图… 18
4 工艺计算…19
  4.1 概述…19
  4.2 反应器19
    4.2.1 物料衡算19
    4.2.2 热量衡算22
    4.2.3 设备计算24
  4.3 分离和回收系统…37
    4.3.1 C4塔…37
    4.3.2 水洗塔… 45
    4.3.3 甲醇回收塔… 48
  4.4 全装置物料和热量平衡49
5 设备一览表…   52
  5.1 反应器、塔类…52
  5.2 容器储罐类… 52
  5.3 冷换装置 53
6 工艺流程图 … 57
7 施工过程注意事项及执行标准规范 58
  7.1 注意事项 58
  7.2 执行标准 58
致谢 59
参考文献60
附录 61
1 概述
1.1 甲基叔丁基醚的生产工艺及设计意义 年产12万吨MTBE甲基叔丁基醚装置生产工艺设计+CAD图纸:http://www.youerw.com/huaxue/lunwen_2541.html
------分隔线----------------------------
推荐内容