毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

溶胶凝胶法制备碳纳米管锶铁氧体纳米复合材料的结构和磁性能

时间:2017-05-21 09:10来源:毕业论文
通过在溶胶中添加CNTs的方法利用溶胶-凝胶自蔓延燃燃烧法制备锶铁氧体前躯体采用微波和马弗炉烧结的方式,制备出了碳纳米管/锶铁氧体纳米复合材料。XRD显示不同烧结方式不同烧结

摘要:通过在溶胶中添加CNTs的方法利用溶胶-凝胶自蔓延燃燃烧法制备锶铁氧体前躯体采用微波和马弗炉烧结的方式,制备出了碳纳米管/锶铁氧体纳米复合材料。XRD显示不同烧结方式不同烧结时间所得产物均为锶铁氧体,马弗炉烧结在(114)面均表现出优势生长,这与锶铁氧体在碳管表面的包覆引起的有序性有关。微波保温80min掺杂2%的样品在(107)面出现了极强的优势生长,该掺杂量对2.45GHz微波的较强吸收诱导了样品在此方向的优势生长。VSM测试表明,(114)面的优势生长极大的降低了锶铁氧体的磁性能。8933
关键词:溶胶-凝胶;自蔓延;碳纳米管/锶铁氧体纳米复合材料;微波煅烧
The structure and magnetic properties of CNTs /strontium ferrite nanocomposites prepared by Sol-gel method
Abstract :Using sol-gel self-propagating burning method which by adding CNTs in the sol to prepare the strontium ferrite nanocomposite The presoma is sintered by microwave as well as muffle furnace,thus the nanotubes/strontium-iron oxide is prepared.As is shown in the XRD images,with different sintering methods  and    sintering time the product are all strontium ferrite,the face (114) grows well when sintered by muffle fuenace,this related to the ordering of strontium ferrite cladding on the surface of carbon nanotubes.While the face(107) of the sample sintered by microwave,thermal insulated in 80min and doped by 2% shows great growing superiority.This dope content lead to strongly absurb of 2.45GHz microwave and induce superior growth of this direction.As in shown in VSM,the superior growth of face(114) has greatly reduce the magnetic property of strontium ferrite.
Key words: sol - gel;self-propagating;carbon nanotube / strontium ferrite nanocomposites;microwave calcining
目  录
1. 绪论    1
1.1永磁材料    1
1.1.1永磁材料分类    1
1.1.2永磁材料的发展历程    1
1.1.3新型永磁磁性材料----铁氧体    2
1.1.4 铁氧体的制备    2
1.2 碳纳米管    3
1.3 CNTs表面处理及纯化    4
1.4锶铁氧体与碳纳米管复合    5
1.5溶胶凝胶法    6
1.6微波煅烧    7
1.6.1微波在无机合成中的应用    8
1.7选题的目的与意义    9
1.7.1实验机理    9
1.7.2研究内容    10
2.实验部分    11
2.1实验原料及实验仪器和设备    11
2.1.1实验原料    11
2.1.2实验仪器及设备    11
2.2仪器设备简介    12
2.2.1微波实验炉介绍    12
2.2.2X射线衍射仪介绍    13
2.2.3振动样品磁强计介绍    13
2.3实验过程    13
2.3.1CNTs的纯化及表征    13
2.3.2不同分散剂对CNTs分散的影响    14
2.3.3锶铁氧体的制备    14
2.3.4确定调节PH值顺序对实验的影响(CNTs—0.188g)    15
2.3.5CNTs不同含量的制样    15
2.3.6不同焙烧方法    15
3.实验结果分析    15
3.1CNTs分散    15
3.2热重分析    17
3.3XRD检测    18
3.4磁性能测试    26
4.结论    32
致 谢    33
参考文献    34
1. 绪论
1.1永磁材料
永磁材料具有宽磁滞回线、高矫顽力、高剩磁,一经磁化即能保持恒定磁性的材料,又称硬磁材料。实用中,永磁材料工作于深度磁饱和及充磁后磁滞回线的第二象限退磁部分。常用的永磁材料分为铝镍钴系永磁合金、铁铬钴系永磁合金、永磁铁氧体、稀土永磁材料和复合永磁材料。 溶胶凝胶法制备碳纳米管锶铁氧体纳米复合材料的结构和磁性能:http://www.youerw.com/cailiao/lunwen_7473.html
------分隔线----------------------------
推荐内容