随着科技的发展，各国的军事力量不断加强。雷达在军事系统中发挥着非常重要的作用，其功能越来越强大、结构越来越复杂。研制体制先进、功能强大的雷达是雷达研制人员追求的目标。但一个设计复杂的雷达往往因为物力财力的原因，并不能在每次完成雷达样品的生产后就进行外场检测，因此就需要设计一个雷达目标模拟器来模拟一些现实环境来以初步检测雷达性能，而雷达时控机来作为雷达目标模拟器中的一部分，主要负责控制命令的传输和数据交换。雷达时控机的设计需求也因此产生。32609
本课题任务是完成基于WIFI的雷达时控机的设计，主要内容包括软件部分和硬件部分，软件部分主要完成PCB的绘制以及相应控制程序，接口程序，调试程序的设计，硬件部分主要包括PCB 的焊接以及调试工作。
论文主要包括了时控机的原理分析，原理图的制作，PCB的绘制过程，以及最后成品的验证，还包括了实验中遇到的问题以及对于未来时控机的一些优化观点。
毕业论文关键词  雷达 目标模拟器 雷达时控机 WIFI PCB Altium Designer 10
毕业设计说明书中文摘要
毕业设计说明书外文摘要
Title    WIFI-Based Radar Timing Control System Design   
Abstract
With the development of technology and strengthen of military force, radar, as the vital part of military system, whose functions and relevant structures being more complicated, has been more and more important. And how to design a more functional and comprehensive radar has been the focus of each country’s scientific research. However, an elaborate-design radar is not possible to be tested in the real environment due to the material resources and financial reasons. So we need to design a Radar Target Simulator to examine the radar performance, and at the same time a radar timing control system which controls several parameters and the communication between different devices. Therefore the need to design a control system is urgent.
The project is a design about WIFI-based radar timing control system. We can change the functions of wave beam, radar working frequency, radar working mode, radar pulse repetition rate, pulse-length, direction of beam and so on. This project includes two parts. One is about software.  It includes the drawing of PCB and control programs, port programs, debugging programs. Another is about hard ware including the soldering of PCB and relevant debugging.
This thesis covers the analysis of the theory of control system, the process of design the schematic diagram and PCB and the test on the finished product. The problems between the project and the opinions about the future timing control system will be included at the end of the paper.
Keywords  Radar Target Simulator Timing Control System
          WIFI PCB Altium Designer 10
 目   次
1绪论1
1.1 目标模拟器和时控机研究背景1
1.2 目标模拟器和时控机发展现状1
1.3 设计主要任务及论文结构3
2  时控机基础4
2.1时控机功能4
2.2时控机概念框图4
2.3时控机系统框图5
2.4 时控机功能框图6
2.5 芯片介绍8
3硬件设计方案10
3.1系统功能概述10
3.2系统结构概述10
3.3 FPGA 电路设计11
3.4 FPGA配置12
4 PCB设计 13
4.1原理图绘制 13
4.2  PCB绘制20
4.3  PCB调试26
5设计思考 31
结论35
致谢36
参考文献37
附录A原理图38
1 绪论
本章介绍了雷达目标模拟器以及时控机的研究背景和发展现状。同时介绍了本次
毕业设计所要完成的主要内容,论文结构。
1.1    目标模拟器及时控机研究背景 Altium基于WIFI的雷达时控机设计与实现+电路图:http://www.youerw.com/tongxin/lunwen_29289.html