毕业论文

当前位置: 毕业论文 > 机械论文 >

Solidworks焊接工装设备的设计及建模+CAD图纸

时间:2020-07-12 21:29来源:毕业论文
分析了焊接反应釜环形焊缝的机械装置的工作原理,研究并设计整体的传动系统的布局、结构分析,并进行三维建模。在满足各部件自身的强刚度条件后,布局上互不干涉,空间分配,
打赏

摘要焊接设备是以节约在装配、辅助和附加作业中的时间,并以提高焊接效率和质量为目的的机械设备,在以焊接为主要工艺的制造过程中起着重要作用。本课题主要分析了焊接反应釜环形焊缝的机械装置的工作原理,研究并设计整体的传动系统的布局、结构分析,并进行三维建模。在满足各部件自身的强刚度条件后,布局上互不干涉,空间分配,结构安排,以及不常接触的传动设计分析对本科阶段的学习做了很好的补充。通过调研,了解了国内外在焊接设备领域中存在的问题和发展现状,其中由于总传动比过大导致的设备效率偏低和不同方向进给的电气控制有待于进一步的努力。作为焊件生产周期中提高效率最关键的措施,合理地设计并广泛地应用焊接辅助设备对实际生产有着重大的现实意义。52360

毕业论文关键词:焊接设备,反应釜,环形焊缝,三维建模。

Abstract Welding equipment is the kind of machine that aimed at saving the consumption in the assembly,support and additional time for operations, and improve the efficiency and quality,which also plays an important role in the manufacturing process in which welding is the main process.This subject mainly analyses the working principle of mechanical device which is applies to the welding reaction jug of annular weld.Study and design the layout of the overall drive system,structural analysis,and three-dimensional modeling After meeting the stiffness and strength of each part,mutual non-interference in the layout, space allocation, structural arrangements, the transmission usually infrequent contacted does a very good supplement to the undergraduate studies. Through the investigation and research, understanding the problems and current status in the field of welding equipment domestic and internationally. The inefficiency which owing to the large total transmission ratio, feed in different directions and the electrical control needs further efforts. As the key of improving efficiency measures in welding production cycle, welding auxiliary equipment will have a great practical significance if it is reasonable designed and widely used.

Keywords:Welding equipment; reactor; annular weld; Three-dimensional modeling .

目录

第一章 绪论 1

1.1概述 1

1.1.1焊接设备的概述 1

1.1.2焊接设备系统结构特点 1

1.1.3焊接设备的分类 1

1.2选题的目的和意义 2

1.3国内外的发展现状 3

1.4 本课题研究的基本内容 5

1.5课题的研究方法、步骤和措施 5

第二章 方案的设计 6

2.1分析课题 6

2.2方案的选择 6

第三章 零部件设计计算 9

3.1电机的选择 9

3.1.1确定总阻力矩 9

3.1.2 确定电机转速 9

3.1.3分配传动比 10

3.1.4运动和动力参数的计算 10

3.2蜗杆减速器的选择 12

3.2.1初选 值 12

3.2.2中心距计算 12

3.2.3传动基本尺寸 13

3.2.4齿面接触疲劳强度验算 Solidworks焊接工装设备的设计及建模+CAD图纸:http://www.youerw.com/jixie/lunwen_56217.html

------分隔线----------------------------
推荐内容