摘要随着社会飞速发展，科技的快速进步，工业现代化也得到了逐步完善，工业输送的手段也越来越丰富。自动化生产过程中，物料或者产品的输送是一个重要的环节，决定着企业的生产效率，影响着企业的经济效益。但由于企业输送种类的不同，输送速度的要求也随之改变，所以输送速度应该是可以进行调节和控制。本文设计的是皮带式调速输送系统，本设计可以随着皮带上输送物料质量的改变，及时对速度进行对应的调节，使物料达到定量输送的要求。本设计分为4章，分别介绍了皮带式调速输送系统设计的总体方案；皮带输送机的机械结构设计；驱动方式选择；控制系统的设计；检测系统设计等结构。46298
毕业论文关键词：皮带；调速；定量
Abstract
With the rapid development of society, the rapid progress of science and technology, industrial modernization and gradually improve the means of industrial transport is also more and more rich. In the process of automatic production, the transportation of materials or products is an important link, which determines the production efficiency and the economic efficiency of enterprises. However, due to the different types of transport enterprises, the transfer speed of the requirements will also be changed, so the transmission speed should be able to adjust and control. In this paper, the design of belt conveyor system, this design can be transported with the belt material quality change, the speed of the corresponding adjustment, so that the material to reach the requirements of quantitative transport. In this paper, the design of belt conveyor system, this design can be transported with the belt material quality change, the speed of the corresponding adjustment, so that the material to reach the requirements of quantitative transport. The design is pided into four chapters, respectively introduces the system design of the overall scheme of the conveyer belt speed, mechanical structure design of belt conveyor driving mode selection; control system design; detection system design and structure.
Key words: belt；speed regulation；ration
目 录
第一章 绪论 6
1.1研究背景与意义 6
1.2国内外近状与未来发展趋向 6
1.3课题认识与总体方案设计 7
第二章 皮带输送机总体设计 9
2.1传动机构 9
2.1.1输送带 9
2.1.2传动滚筒 11
2.1.3 改向滚筒 12
2.1.4驱动装置 12
2.1.5联轴器 13
2.1.6托辊 13
2.2计算 14
2.2.1由带宽、带速验算输送能力 14
2.2.2张力的逐点计算 15
2.2.3功率计算 16
2.3张紧装置 16
2.3.1配重块质量 17
第三章 控制系统的设计 18
3.1运动过程分析 18
3.2检测装置 18
3.2.1 速度传感器 18
3.2.2 电子皮带秤 19
3.2.3光电式传感器 19
3.3调速方法 19
3.3.1调速方法的选择 19
3.3.2变频器的选型 20
3.4控制器选择 20
3.4.1 PLC输入/输出模块的选择 21
3.4.2 PLC的选择 21
3.5 I/O端子分配表 21
3.6硬件连接图 22
3.7 控制系统软件设计 22
3.7.1 程序流程图 22
3.7.2 梯形图 23
结束语 26 PLC皮带式调速输送系统设计+CAD图纸+梯形图:http://www.youerw.com/jixie/lunwen_47974.html