毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

AD620永磁式电磁感应传感器设计+骨架结构图

时间:2017-03-31 21:24来源:毕业论文
采用AD620芯片,设计了一种低功耗放大电路,采用9V干电池供电,克服了微弱信号远程传输易被干扰的缺点。用此线圈靶结合数据采集装置组建了试验系统,对带前置放大器的永磁式感应

摘要弹丸的初速是枪炮性能评估的一个重要指标,是武器系统研制及生产校验等环节需要监测的重要参数。为解决目前常用于弹丸速度测量的励磁式线圈靶与感应式线圈靶的缺点,本文设计了一种新型的永磁式感应式线圈靶。用永磁代替了产生磁场用的励磁线圈,产生了恒定的磁场;在测试现场,采用AD620芯片,设计了一种低功耗放大电路,采用9V干电池供电,克服了微弱信号远程传输易被干扰的缺点。用此线圈靶结合数据采集装置组建了试验系统,对带前置放大器的永磁式感应线圈靶的性能进行了验证试验。试验结果表明,带前置放大器的永磁式感应式线圈靶信号大,抗干扰能力强。6831
关键词  永磁式  弹丸速度  前置放大器  线圈靶  
毕业设计说明书(论文)外文摘要

Title  Design of permanent magnet electromagnetic induction  sensor   
Abstract
The muzzle velocity of the projectile is an important indicator of performance assessment of the guns,it is the  important parameters of the weapon system development , production and verification .In order to solve the disadvantage of  the excitation coil target and the induction coil target, which commonly used in the projectile velocity measurement ,a new type of permanent magnet induction coil target was designed in this paper.It was used the permanent magnet to replace the excitation coil for producing a constant magnetic field,and  designed a low-power amplifie with AD620 ,which used a 9V battery to supply power, and it solved the disadvantage of the weak signal is ssusceptible to interference in the remote transmission. Using this coil target combined with data acquisition devices to set up a test system to test the performance of the permanent magnet induction coil target ,the results shows the signal was large and it has a strong anti-jamming capability.

Keywords  Permanent magnet   Projectile velocity   Preamplifier       Coil Target    
目   次

目   次    1
1  绪论    1
1.1  研究的背景及意义    1
1.2  国内外研究现状    1
1.2.1 测速线圈靶    1
1.2.2  永久磁铁    2
1.3  本论文开展的工作    4
2  永磁式电磁感应传感器设计    4
2.1  线圈骨架设计    6
2.2  线圈选择    7
2.3  永磁材料选择    11
2.4  传感器制作    14
3  电路设计    15
4  试验过程及结果分析    17
4.1  试验系统    17
4.2  试验过程    18
结  论    22
致  谢    23
参 考 文 献    24
附录A  线圈靶实物图    25
附录B  线圈靶骨架结构图    26
 
1  绪论
1.1  研究的背景及意义
兵器测试是发展兵器技术的基础,是兵器科研与生产不可缺少的一环。对弹丸性能参数的测量主要集中在弹丸的飞行速度、飞行姿态、飞行时间参数等,其中弹丸飞行速度的测量是武器系统各种运动参数测试中一项至关重要的内容。弹丸的初速是影响弹丸射程的一个重要因素,它在很大程度上反映了火药装药设计的优劣和能量利用率的高低,是检验内弹道设计参数的重要指标[1]。理论初速通常可以由内弹道计算得到。由于发射环境实际参数与理论计算的参数存在差异,导致理论初速与实际初速存在误差,此误差影响着枪炮的射击精度。为此有必要对弹丸的实际初速进行测定,减小或消除理论计算与实际间的误差,从而高武器的设计精度因此,测定弹丸初速是枪炮、弹药及火药的研制和鉴定中最基本的实验项目之一[2]。弹丸初速测量装置性能对火炮兵器的生产、研究,发展和应用产生直接的影响。 AD620永磁式电磁感应传感器设计+骨架结构图:http://www.youerw.com/jixie/lunwen_4559.html
------分隔线----------------------------
推荐内容