毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

捣固焦炉推焦机构实时检测系统设计+CAD图纸

时间:2019-05-04 21:53来源:毕业论文
传感器的结构设计与选择和安装结构的设计。选择适当的传感器用来检测焦炉推焦过程中待测轴的扭矩与转速变化状况和推焦杆的位移和振动状态,并且设计适当的机械结构安装传感器

摘要本次课题完成了对捣固焦炉推焦机构的实时检测系统的设计,该系统完成了对捣固焦炉推焦进程中待测轴的扭矩与转速的变化和推焦杆位移与振动状态的变化的实时监测。此系统对在焦炉推焦工作时能够实时反映工作情况,对工作环境及状态的好坏有着即时的反应,便于监控焦炉推焦的工作状况。35159
   本次毕业论文课题的主要内容是传感器的结构设计与选择和安装结构的设计。选择适当的传感器用来检测焦炉推焦过程中待测轴的扭矩与转速变化状况和推焦杆的位移和振动状态,并且设计适当的机械结构安装传感器使其正常工作。之后对各个机构连接部分的螺栓进行强度校核,以确保装置的安全性。
This paper completed the design of real time detecting system of the focal mechanism of the tamping coke oven push, the system completed of tamping coke oven coke pushing process to be measured in the shaft torque and rotate speed of change and the real-time monitoring of the coke pushing rod displacement and vibration state changes.The system can reflect the working conditions in real-time when coke oven push coke, and have instant reaction to the working environment and state, so it can be easy to monitor coke oven coke.
    The main content of this subject is the structure design and selection of the sensor and the design of the structure.. Select appropriate sensors for detection of coke oven coke pushing process to be measured in the axis of the torque and speed change of and coke pushing rod displacement and vibration state, and design appropriate mechanical structure sensors installed to work properly. After the strength of the bolts for each mechanism connecting part of the check to ensure that the safety of the device.
 目录
1 绪论    3
1.1 引言    3
1.2 项目背景    3
2.设计方案的确定    3
2.1 课题中的主要重点及解决方案    3
2.2 实时监测系统拟定的一般原则    4
2.3 确定最终的实时检测方案    4
2.3.1 技术参数    4
2.3.2 最终设计方案    4
3推焦杆推力测试系统的设计    6
3.1 测试方法的选择与设计    6
3.2 测试仪器的选择与设计    7
3.3 传感器的连接与安装设计    7
4实际工作转速测试系统的设计    12
4.1 测试方法的选择与设计    12
4.2传感器的选择与设计    12
4.3测试仪器的选择与设计    13
4.4传感器的安装与连接    13
5实际工作中振动测试系统的设计    14
5.1测试方法的选择与设计    14
5.2传感器的选择与设计    14
5.3 测试仪器的选择与设计    15
5.4传感器的安装与连接    16
6 测试系统的总成设计    17
6.1实时检测系统的概述    17
6.2 计算机数据采集与检测系统的选择    21
6.3测试系统总成    22
7结论    25
8致谢    26
9参考文献    26
1 绪论
  1.1 引言
近年来,炼焦行业飞速发展,我国炼焦资源分布及需求与储量不相适应的矛盾日益突出,致使美家上涨,炼焦成本剧增。因此,高效、合理的利用炼焦资源,降低配煤成本,大力普及、发展捣固炼焦技术势在必行。在此背景下,国内的捣固炼焦技术得到飞速发展,不断研发出了新的捣固技术。
 在此发展背景下,对捣固机构推焦过程中的推力变化、机构位移和机构振动状态的实时监测是至关重要的,既要检测是否达到工作要求,又要检测其安全性。因此对捣固机构推焦过程中推力、位移和振动变化的实时检测系统进行了设计。 捣固焦炉推焦机构实时检测系统设计+CAD图纸:http://www.youerw.com/jixie/lunwen_32984.html
------分隔线----------------------------
推荐内容