毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

柔性太阳能电池表面发射率控制方法研究

时间:2018-08-08 20:44来源:毕业论文
以CIGS薄膜太阳能电池为研究对象,研究SiO2单层涂层和Al2O3/SiO2或SiO2/Al2O3双层涂层对其辐射特性的影响

摘要随着太阳能薄膜电池技术的不断提高,人们对其热辐射性质提出了更高的要求。传统的盖玻片对于提高薄膜太阳能电池的表面发射率有较好表现,但其刚性特点难以用于铜-铟-镓-硒柔性薄膜太阳能电池。基于对薄膜太阳能电池特性的研究,使用光学涂层既可提高CIGS薄膜太阳能电池的发射率,使其拥有更低的工作温度,又使CIGS太阳能电池拥有轻薄的特点。本文以CIGS薄膜太阳能电池为研究对象,研究SiO2单层涂层和Al2O3/SiO2或SiO2/Al2O3双层涂层对其辐射特性的影响。计算结果表明用Al2O3/SiO2或SiO2/Al2O3双层涂层与用SiO2单层涂层都能在太阳吸收率变化不大的情况下大幅提高CIGS太阳能电池发射率。光学涂层给予CIGS太阳能电池适当的辐射特性来保持电池在允许的温度范围内。26773
关键词:发射率;太阳吸收率;光学涂层;光学特性;太阳能电池
毕业论文设计说明书外文摘要
Title  Improvement of emissivity and absorptivity properties for flexible Cu(In,Ga)Se2 solar cells
Abstract
With the development of the flexible solar cells,there is a growing demand for a better performance of the thermal radiation because the low emissivity cannot meet the demand any more.The coverglass for increasing emissivity of copper–indium–gallium–diselenide (CIGS) thin-film solar cells is not satisfied ,and the reason is that CIGS solar cells would be heavier by the coverglass.Based on the properties of the flexible thin-film solar cells,using optical coatings can not only increase the emissivity of CIGS solar cell in order to decrease the working temperature,but keep CIGS solar cell both thin and light.In this study,CIGS solar cells are investigated and researching the effect of the SiO2 single-coating and Al2O3/SiO2 or SiO2/Al2O3 double-coating for the thermal radiation properties is the objective.The result shows that it can make a substantial increase on the emissivity of CIGS solar cell when SiO2 single-layer coating or Al2O3 and SiO2 double-layer coating is used.CIGS solar cell covered the optical coatings has the appropriate radiation properties to reduce the working temperature.
Keywords   emissivity;solar absorptance ;optical coatings;optical properties;solar cell
目   次
1  绪论    1
1.1  CIGS薄膜太阳能电池介绍    1
1.2  光学涂层简介    2
1.2  研究背景及意义    3
2  热辐射性质和光学性质    4
2.1  热辐射性能的计算方法    4
2.1.1  发射率的计算方法    4
2.1.2  吸收率的计算方法    4
2.2.物体表面反射率计算    5
2.3  光学常数    5
3  光学涂层膜层优化    7
4  高太阳吸收率及高红外发射率膜层优化设计    8
4.1无涂层CIGS薄膜太阳能电池    8
4.2  SiO2单层涂层    9
4.3  SiO2和Al2O3双层涂层    12
4.3.1  SiO2涂层覆盖在Al2O3涂层上面    12
4.3.2  Al2O3涂层覆盖在SiO2涂层上面    15
4.4 太阳能电池工作温度    18
5 讨论    19
结 论    21
致  谢    22
参考文献23
1  绪论
1.1  CIGS薄膜太阳能电池介绍
薄膜电池, 被人们称为第二代光伏电池, 主要有非晶硅电池、碲化镉(CdTe)电池和铜铟镓硒(CIGS)电池。大多数薄膜电池技术都有一个相同之处, 明显的降低了光吸收材料的用量并简化了电池串联等组件工艺, 这大幅降低了生产成本。薄膜太阳能电池池造价低廉、重量轻, 能在多种廉价的衬底上制备成器件,便于大规模制造, 具备极佳的应用潜力, 被认为是大幅度降低光伏发电成本的有效方法。薄膜太阳能电池的研发近年来进展很快, 已成为太阳能电池行业中最有活力的领域, 而其中CIGS电池尤其的突出。 柔性太阳能电池表面发射率控制方法研究:http://www.youerw.com/jixie/lunwen_21047.html
------分隔线----------------------------
推荐内容