毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

TBA水合法年产3.2万吨异丁烯工艺设计

时间:2017-04-20 13:13来源:毕业论文
TBA水合法年产3.2万吨异丁烯工艺设计论文研究叔丁醇脱水制备异丁烯进行工艺计算

摘要 异丁烯是重要的基本有机化工原料之一,是一种合成橡胶的单体,主要是用于制备丁基橡胶和聚异丁烯,高纯度的异丁烯可以用来生产丁基橡胶、聚异丁烯、叔丁酚、抗氧剂、叔丁胺、甲基丙烯腈等许多有机化学原料和精细化工产品。不管是制备丁基橡胶还是聚异丁烯,都要求异丁烯的纯度较高。叔丁醇经过脱水反应可以获得高纯度的异丁烯。如果用作精细化工的原料,那么它的身价显得更高。自从世界各国的发达国家对清洁汽油的要求增加后,TBA的用量也得到快速增长。这就使异丁烯供需也随之趋向于紧张。同时,随着世界各国不断加快发展高附加值的精细化工产品,对于精细化工原料纯异丁烯的需求也随之增大。本论文研究叔丁醇脱水制备异丁烯进行工艺计算。7397
关键词:TBA水合法  异丁烯
A Process Design for 32,000 Tons isobutene Oxide to
Abstract Isobutylene is one of the important basic organic chemical raw materials, a monomer synthetic rubber and is mainly used for the preparation of butyl rubber and poly-isobutylene; high purity isobutene can be used for the production of butyl rubber, poly-isobutylene, tert-butyl phenol, antioxidant, butyl amine, methyl propylene nitrile and many other organic chemical raw materials and fine chemical industry products. No matter is the preparation of butyl rubber or poly-isobutylene, require the high purity isobutene. Tert-butyl alcohol by dehydration reaction can obtain high purity isobutene. If used as a fine chemical raw material, then its value is higher. Since the world developed country requirements for clean gasoline increases, the amount of TBA also get rapid growth. This makes the supply and demand will tend to be nervous of isobutene. At the same time, as the world continues to accelerate the development of high value-added fine chemical products, for the fine chemical raw materials of pure isobutylene demand increases. This paper study on the dehydration of butyl alcohol is for preparing isobutene process calculation.
Key Words :TBA hydration;Isobutene
目  录
1 概述    1
  1.1 异丁烯的生产工艺及设计意义    1
  1.1.1硫酸萃取法    2
  1.1.2吸附分离法    2
  1.1.3异丁烷共氧化联产法 ---Halcon 共氧化法    2
  1.1.4叔丁醇脱水法    2
  1.1.5树脂水合脱水法    3
  1.1.6甲基叔丁基醚( MTBE )裂解法    4
  1.1.7异构化法    5
  1.1.8异丁烷脱氢法    5
1.2 异丁烯的性质    6
  1.2.1 异丁烯    6
  1.2.2 异丁烯的用途    6
  1.2.3 世界异丁烯的概况    7
2 工艺流程设计    8
2.1 工艺原理    8
2.2 生产过程    8
2.3 工艺流程叙述    8
3 工艺计算    9
3.1 设计基础数据    9
  3.1.1 物质性质数据    9
  3.1.2 设计工艺条件与依据    9
3.2 物料衡算    10
  3.2.1 第一反应器    10
  3.2.2第一精馏塔    11
3.2.3第二反应器    13
  3.2.4第二精馏塔    14
  3.2.5叔丁醇回收塔    15
3.3 热量衡算    15
  3.3.1 第一反应器    15
  33.2第一精馏塔    18
3.3.3第二反应器    20
  3.3.4第二精馏塔    23
  3.3.5叔丁醇回收塔    25 TBA水合法年产3.2万吨异丁烯工艺设计:http://www.youerw.com/huaxue/lunwen_5357.html
------分隔线----------------------------
推荐内容