毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

养猪厂养殖废水处理工艺设计+CAD图纸

时间:2019-01-06 18:22来源:毕业论文
氨气吹脱——厌氧反应——除磷——消毒——出水。其涉及的具体操作是工艺流程中的各主要构筑物,确定尺寸等的计算和说明。设计结果通过CAD制图(污水厂平面布置图、及主要处理

养猪厂养殖废水处理工艺设计摘要:随着近年来畜禽养殖业的迅速发展,畜禽养殖废水排放量也逐渐增加,对水体和农业生态环境造成严重的负面影响。本设计的任务是养猪厂养殖废水的处理工程设计,要求对废水处理进行整体设计。所给出的养猪厂废水进水水质为:Q =900 m3/d,BOD5 =3000 mg/L,COD=5000 mg/L,SS =1000 mg/L,NH3-N =300 mg/L,TP =30 mg/L,pH =6 - 9。设计最终要求是满足《畜禽养殖业污染物排放标准》(GB18596-2001)的排放要求。32347
在本设计中主要采用的废水处理工艺为:氨气吹脱——厌氧反应——除磷——消毒——出水。其涉及的具体操作是工艺流程中的各主要构筑物,确定尺寸等的计算和说明。设计结果通过CAD制图(污水厂平面布置图、及主要处理构筑物)给出。
毕业论文关键词:养猪厂废水 氨吹脱塔 UASB 除磷池
Pig Farm Wastewater Treatment Engineering Design
Abstract  With the rapid development of livestock and poultry breeding in recent years, the livestock and poultry breeding wastewater emissions gradually increased, caused seriously negative impact to agricultural ecological environment and water quality. This design task is the pig farm breeding wastewater treatment engineering design, that requires the overall design of wastewater treatment. Pig farm wastewater inlet water quality provided as follows: Q = 900 m3/d, BOD5 = 3000 mg/L, COD = 5000 mg/L, SS = 1000 mg/L, NH3-N = 300 mg/L, TP = 30 mg/L, pH = 6 ~ 9. Design for the standard of the livestock and poultry breeding industry pollutant emission (GB18596-2001) emissions requirements.
Mainly used in the design of the sewage treatment process is that Remove ammonia - Anaerobic reaction - Coagulation precipitation- Disinfection- Draining. It involves the concrete operation, such as the major structures, and their size in calculation. The results of design are need through auto CAD ,including sewage plant layout, main treatment structures).
Keyword: Pig farm wastewater, Ammonia to remove tower,UASB, Coagulation and Sedimentation tank
 目  录
第一章    绪论    1
1.1养猪厂废水的来源    1
1.2养猪厂废水的特点    1
1.3养猪厂废水对环境的危害    1
1.4养猪厂废水的处理方法    1
1.4.1物理处理方法    1
1.4.2化学处理方法    1
1.4.3生物处理方法    2
第二章    方案设计说明    3
2.1 工程设计资料    3
2.1.1 设计资料    3
2.1.2设计目标    3
2.1.3 设计依据    3
2.1.4 指导思想    3
2.2 养猪污水处理工艺流程的设计    3
2.3各处理单元水质指标预测    3
第三章    设计计算    5
3.1 格栅    5
3.1.1 格栅设计数据    5
3.1.2格栅的设计计算    5
3.2 初沉池    8
3.2.1 简介    8
3.2.2 沉淀池的一般设计原则及设计参数    8
3.2.3竖流式沉淀池的构造    9
3.2.4 竖流式沉淀池的设计计算    9
3.3 氨气脱除塔    12
3.3.1 简介    12
3.3.2 氨气吹脱    12
3.3.3 氨气脱除塔工作的影响因素与设计参数    13
3.3.4 设计计算    13
3.4 上流式厌氧污泥床(UASB)    15
3.4.1 简介    15
3.4.2 设计计算    15
3.5 除磷池    22 养猪厂养殖废水处理工艺设计+CAD图纸:http://www.youerw.com/huaxue/lunwen_28875.html
------分隔线----------------------------
推荐内容