毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

S型气溶胶灭火剂的配方优化设计及性能测试研究

时间:2019-01-05 19:25来源:毕业论文
选择硝酸锶与硝酸钾比例为1.5:1,共同作为氧化剂,酚醛树脂作为粘合剂,双氰胺作为可燃剂,草酸钾、镁、六次甲基四胺作为调节剂制作气溶胶灭火剂配方,并对该配方进行筛选测定

摘要气溶胶灭火剂是20世纪中期新兴起来的灭火剂,它与传统的灭火剂相比有着高效无毒,低压操作和经济快捷等优点。经查阅相关文献与计算,本文设计几组气溶胶灭火剂的配方,通过实验对其灭火效率、腐蚀率等方面进行测试,选择最优的灭火剂配方。32263
    气溶胶灭火剂的原料配比决定了灭火剂灭火效率。本文选择硝酸锶与硝酸钾比例为1.5:1,共同作为氧化剂,酚醛树脂作为粘合剂,双氰胺作为可燃剂,草酸钾、镁、优尔次甲基四胺作为调节剂制作气溶胶灭火剂配方,并对该配方进行筛选测定。最后经实验证明该灭火剂配方适宜制作气溶胶灭火剂并在实际过程中得到运用。
关键词  气溶胶灭火剂  配方设计  灭火性能
毕业论文设计说明书外文摘要
Title   S type of aerosol fire extinguishing agent formula   optimization design and performance test research            
Abstract Aerosol fire extinguishing agent is the agent in the middle of the 20th century emerging, it has high efficiency compared with the traditional fire extinguishing agent non-toxic, low pressure and economic quick operation, etc. Check related literature and calculation, this paper design a few groups of aerosol fire extinguishing agent formula, through the experiment on its extinguishing efficiency and corrosion rate test, select the optimal agent formula.
    Aerosol fire extinguishing agent ratio of raw material determines the efficiency of fire extinguishing agent. This paper choose the strontium nitrate and potassium nitrate ratio is 1.5:1, the common as oxidant, phenolic resin as binder, dicyandiamide as combustible agent, potassium, magnesium oxalate, six methyl tetramine as regulator making aerosol fire extinguishing agent formula, and the formula to determine screening. Finally experiments show that the extinguishing agent formula is suitable for production of aerosol fire extinguishing agent and be used in the actual process.
Keywords  Aerosol fire extinguishing agent  Formula design  Fire extinguishing   performance
目   次
1  绪论    1
1.1  气溶胶灭火剂的研究背景及意义    1
1.2  气溶胶灭火剂国内外的研究现状    3
1.2.1  国外的研究历史    3
1.2.2  国内的研究现状    3
1.3  本课题的研究目的目的和任务    4
2  气溶胶灭火剂的配方及灭火原理的研究    5
2.1  气溶胶灭火剂的灭火机理    5
2.2  气溶胶灭火剂的配方选择与设计    5
2.2.1  配方的组成及原材料的选择    5
2.2.2  气溶胶灭火剂配方的初步设计    6
3  实验研究    7
3.1  K型灭火剂与S型灭火剂的对比    7
3.2  调节剂和粘合剂用量的选择    8
3.3  可燃剂的选择    10
3.4  气溶胶灭火剂的机械感度测试    11
3.4.1  撞击感度测试    11
3.4.2  摩擦感度测试    12
3.4.3  实验结果与讨论    13
3.5  气溶胶灭火剂的热安定性的测定    13
结  论    15
致  谢    16
参考文献17
1  绪论
    20世纪60年代,苏联人在军用烟火技术上改革创新,研发的新一代灭火剂即气溶胶灭火剂。气溶胶灭火剂的灭火原理是通过一系列氧化还原反应产生的气体和固体颗粒来阻断火焰的继续燃烧。其中气体成分主要是水蒸气、CO2、N2等,固体成分主要是K盐、Sr盐、金属氧化物等。随着科技的进步,电子通讯设备在我们生活中的应用越来越普遍。一些金属及精密的电子仪器如果发生火灾,不仅会造成巨大的财产损害,而且用一般的灭火剂并不能起到良好的效果。气溶胶灭火剂具有灭火效率高,无毒无害且对环境无危害,灭火系统安装文修比较简单、经济造价少等诸多优点,所以这种新型的气溶胶灭火剂正越来越受到人么青睐,它已作为新型灭火剂在国内外的不同领域得到应用[1]。 S型气溶胶灭火剂的配方优化设计及性能测试研究:http://www.youerw.com/huaxue/lunwen_28763.html
------分隔线----------------------------
推荐内容