毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

圆柱型颗粒堆积方法研究电极有效性质

时间:2022-11-20 20:55来源:毕业论文
固体氧化物燃料电池(SOFC)作为一种清洁无污染的新型发电装置,可以很好的代替目前大部分的发电装置。电极的性能对燃料电池有着很大的影响

摘要固体氧化物燃料电池(SOFC)作为一种清洁无污染的新型发电装置,可以很好的代替目前大部分的发电装置。电极的性能对燃料电池有着很大的影响,本文主要利用圆柱型颗粒堆积方法研究电极有效性质。86185

第一章绪论通过讲述能源的现状,引入了燃料电池这种新型发电装置,然后对燃料电池中的固体氧化物燃料电池进行了详细的介绍,最后简单的介绍了静电纺丝技术,并且说明了选题依据。

第二章首先介绍了EDEM软件,详细介绍了模型建立的操作步骤。接着使用Matlab程序把圆柱体的位置信息转化成为COMSOL文件。最后,对转化的文件进行分析,验证了Matlab程序的正确性。

第三章介绍了COMSOL软件的运用,并且把求得的数据进行了分析与计算,分别求出了(1)有效电导率和导电固体体积分数之间的函数关系式;(2)有效扩散系数和孔隙率之间的函数关系式。

关键词:固体氧化物燃料电池;孔隙率;有效电导率;有效扩散系数

Abstract

Solid oxide fuel cell (SOFC)is a kind of clean and non polluting new power generation equipment, and can be a good substitute for most of the current power generation devices。 The performance of electrode has a great influence on the fuel cell。 This paper mainly studies the effect of electrode structure parameters on the performance of the electrode。

In the first chapter, based on the current situation of the energy, introducing the fuel cell which is a new type of power generation device 。 Then, the solid oxide fuel cells in the fuel cell are introduced in detail。 Finally, introducing the electrostatic spinning technology in brief and explaining the Selected topic basis。

In the second chapter, the EDEM software is introduced, and the operation steps of the model are introduced in detail。 Then use the Matlab program to convert the cylinder's position information into COMSOL file。 Finally, the transformation of the document analysis, verify the correctness of the Matlab program。

The third chapter introduced using COMSOL software to analysis and calculate  the data, and seek out respectively (1)the function between the effective conductivity and conductive solid volume fraction; (2)the function between the effective diffusion coefficient and porosity。

Key words: solid oxide fuel cell; porosity; effective conductivity; effective diffusion coefficient

目录

第一章  绪论 1

1。1 能源概述 1

1。2 氢能简介 2

1。3 燃料电池简介 2

1。4 固体氧化物燃料电池简介 6

1。4。1 固体氧化物燃料电池的优点 6

1。4。2 固体氧化物燃料电池的构成和原理 7

1。4。3 固体氧化物燃料电池堆的分类 8

1。4。4 固体氧化物燃料电池构件的制备工艺 9

1。5 静电纺丝 9

1。5。1 静电纺丝技术概述 9

1。5。2 静电纺丝技术的现状 10

1。5。3 静电纺丝技术的应用 10

1。6 论文选题依据 11

第二章  模型的构建 12

2。1 使用的软件 12

2。2 离散单元法的基础理论 圆柱型颗粒堆积方法研究电极有效性质:http://www.youerw.com/huaxue/lunwen_102310.html

------分隔线----------------------------
推荐内容