毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C51单片机的音乐喷泉控制系统设计+电路路

时间:2024-02-19 16:48来源:毕业论文
单片机的音乐喷泉控制系统设计。以AT89C51单片机为核心的实用型小型音乐喷泉控制系统,该系统所包含了单片机控制电路、信号采集与放大电路、AD转换电路以及晶振和复位电路等

摘要:随着人们生活水平的提高和建设绿色城市的需求,当今喷泉工程与高新技术的结合使的喷泉效果令人赏心悦目、流连忘返,因此愈来愈成为休闲娱乐产业中的一项重要产品。该设计介绍了一个以AT89C51单片机为核心的实用型小型音乐喷泉控制系统,该系统所包含了单片机控制电路、信号采集与放大电路、AD转换电路以及晶振和复位电路等,通过LED数码管显示可直接观察系统的运行状态。实验结果表明,用户可直接设置播放音乐的类型,通过软件系统和硬件系统的运行实时控制和显示等功能,证明了该系统的可行性。94025

毕业论文关键词:音乐喷泉,单片机控制,AD转换电路

Abstract:Along with the improvement of living standards and the establishment of green city for demand, combined with today's fountain engineering and high-tech the fountain effect is good to hear or see,linger,becomes more and more important in the entertainment industry and leisure products。 This design introduces a practical small music fountain based on AT89C51 SCM control system, the system includes a system composed of single-chip control circuit, signal acquisition and amplification circuit, AD conversion circuit, crystal oscillator and reset circuit is simple, the running state of the system can be directly observed through the LED digital tube。 The experimental results show that the user can directly set the type of music to play, through the software system and hardware system running real-time control and display functions, to prove the feasibility of the test。

Key Words: Music fountain, MCU control, AD conversion circuit

目  录

1  前言 4

1。1  论文的设计背景 4

1。2  国内外音乐喷泉案例及发展情况 4

1。3  课题研究的内容及意义 5

2  整体方案设计 5

2。1  音乐喷泉控制系统的要求 5

2。2   控制系统目的及任务 6

2。3  控制系统各模块的选择 6

3  音乐喷泉控制系统硬件设计 7

3。1  系统整体结构 8

3。2  单片机主控模块 8

3。3  音乐信号的采集 9

3。4   AT89C51 单片机最小系统 12

3。5  AD转换电路 13

3。6  潜水泵设计 14

3。7  灯光硬件方案设计 15

4  音乐喷泉控制系统软件设计 15

4。1  控制系统基本流程图 16

4。2  启动AD转换模块 16

4。3  歌曲存储模块 17

4。4  灯光控制模块 19

5  实验仿真 20

结  论 24

参 考 文 献 25

致谢 26

1  前言

本章主要内容是介绍广场音乐喷泉的设计背景、设计广场音乐喷泉控制系统的目的和任务以及这一课题的基本要求与控制系统中的单片机知识进行简单的介绍。经过分析该控制系统的各部分的功能要求之后,以达到广场音乐喷泉控制系统的最优实现方法。 AT89C51单片机的音乐喷泉控制系统设计+电路路:http://www.youerw.com/zidonghua/lunwen_201990.html

------分隔线----------------------------
推荐内容