毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

STM32电动汽车交流充电桩设计+电路图

时间:2024-02-15 10:08来源:毕业论文
STM32电动汽车交流充电桩设计。提出了一种电动汽车交流充电桩的设计。本文分硬件和软件两个方面进行设计,硬件部分选用法国意法半导体公司生产的ARM Cortex TM.M3内核的STM32F103ZET6芯片

摘  要:随着汽车行业的发展,各国政府以及汽车企业普遍认识到节能和减排是汽车技术发展的方向,发展电动汽车将是解决这两个难题的最佳途径。那么,电动汽车充电桩设备当然必不可少。因此本文提出了一种电动汽车交流充电桩的设计。本文分硬件和软件两个方面进行设计,硬件部分选用法国意法半导体公司生产的ARM Cortex TM。M3内核的STM32F103ZET6芯片作为主控制核心,完成了电源转换、触摸屏模块、CAN总线接口模块、存储模块和电能计量模块的设计。软件部分完成了系统工作流程、人机交互、系统检测和计量计费的流程的设计方案。最后在仿真中,对电源交换模块的降压、整流、滤波和稳压部分做了详细的仿真和分析,得出此模块是切实可行的。93834

毕业论文关键词:电动汽车,交流充电桩,STM32F103ZET6,KeilμVision4

Abstract:With the development of the automobile industry, the governments of various countries and the automobile enterprises generally realize that the energy saving and emission reduction is the direction of the development of automobile technology, the development of electric vehicles will be the best way to solve these two problems。 So, electric vehicle charging pile equipment is essential。 Therefore, this paper presents a design of electric vehicle AC charging pile。 This paper is pided into two aspects of hardware and software design, hardware selection of French the STMICROELECTRONICS production STM32F103ZET6 chip ARM Cortex TM。M3 kernel as the main control core, the power conversion, touch screen module, CAN interface module, memory module and power measurement module design。 In the software part, the system flow chart, the design method of the man-machine interaction, the system detection and the metering and billing are completed。 Finally, in the simulation, the simulation and analysis of the buck, rectification, filtering and voltage regulator of the power switching module are made。源C于H优J尔W论R文M网WwW.youeRw.com 原文+QQ752-018766

Keywords: Electric Vehicle,AC Charging Pile,STM32F103ZET6,KeilVision4

目录

1 绪论  4

1。1 课题研究的背景和意义  4

1。2 国内外电动汽车充电设施发展现状 4

1。3 本文的主要工作和章节的安排  6

2 交流充电桩的总体设计  7

2。1系统的总体结构  7

2。2 电动汽车充电桩的工作原理  7

2。3 电动汽车充电桩的设计特点  8

2。4 电动汽车充电桩的技术要求  8

2。5 本章小结  9

3 交流充电桩的硬件设计  9

3。1 中央控制模块  9

3。2 交流输入控制模块  16

3。3 交流输出控制模块  17

3。4 本章小结  18

4 交流充电桩的软件设计  18

4。1 系统工作流程  18

4。2 人机交互模块  20

4。3 检测模块  22

4。4 计量计费模块  24

4。5 本章小结  25

5 系统仿真与分析  26

5。1 电源转换仿真  26

5。2 电源转换的仿真结果分析  26

5。3 本章小结  30

总结与展望  31

参考文献  32

致谢  33

附录  34

1 绪论

1。1 课题研究的背景和意义

全国两会的热风加上新能源的热度,使得全国两会的汽车代表、委员的高谈阔论、一举一动都格外瞩目,还真是百花齐放、百家齐鸣。3月5日,李克强在十二届全国人大五次会议上所作的政府工作报告中提及的“鼓励使用清洁能源汽车”,牵动汽车业的神经。从2015年报告提出“新能源车”到2017年报告提出“清洁能源汽车”,一直都关注这个问题。 STM32电动汽车交流充电桩设计+电路图:http://www.youerw.com/zidonghua/lunwen_201761.html

------分隔线----------------------------
推荐内容