毕业论文

打赏
当前位置: 毕业论文 > 物理论文 >

铝合金时效处理时相变引起体积变化的测量研究

时间:2019-06-09 07:48来源:毕业论文
采用硬度测试实验校验体积变化的趋势,二者相符合。随后,用热膨胀仪测量出试样在加热膨胀过程中的相对尺寸变化,并用origin软件进行数据处理,得出尺寸变化结果

摘要:本文采用二次称重法研究铝合金在不同时效处理后的体积变化,并用热膨胀分析得出的结果与二次称重法的结果进行对比,证明了二次称重法在研究体积变化中的可行性。实验内容首先是采用二次称重法得到铝合金在不同时效处理后的体积变化数据,反推出晶体结构改变的信息,从而分析热处理相变。同时,采用硬度测试实验校验体积变化的趋势,二者相符合。随后,用热膨胀仪测量出试样在加热膨胀过程中的相对尺寸变化,并用origin软件进行数据处理,得出尺寸变化结果。最后,对比分析了二次称重法得出的相对体积变化与热膨胀得出的相对尺寸变化,二者基本一致,由此得出了二次称重法能用于测量铝合金体积变化的结论。36077
毕业论文关键词:铝合金;时效处理;二次称重法;热膨胀;
The measurement and research of volume change caused by phase transformation in the aging treatment of aluminum alloy
Abstract:This article studies aluminum alloy volume change under different aging treatment by using secondary weighing,and then it has been proved the feasibility of secondary weighing after comparing the results of the thermal expansion with the results of the secondary weighing .The first step of experimental process is obtaining the volume change data of aluminum alloy in different aging conditions, deducing the change in crystal structure information, so as to analyze the phase change heat treatment.Meanwhile, the hardness test was used for checking and coinciding with the trend of volume change.Then, test out the data changes of the sample in the process of thermal expansion by thermal expansion instrument and data process results in origin software.And,testing the size change trend by hardness.Finally, the secondary weighing data is consistent with the thermal expansion, drawing a conclusion that secondary weighing method can be used to measure changes in the volume of aluminum alloy.
Keywords:aluminum alloy; aging;Second weighing method;Thermal expansion;
              目 录
1 绪论    1
1.1铝合金简介    1
1.2铝合金的时效处理    1
1.2.1铝合金时效处理的目的    1
1.2.2铝合金时效处理特点    2
1.2.3铝合金时效强化原理    2
1.2.4影响时效的因素    3
1.3相变过程分析体积变化的方法    5
1.3.1热膨胀分析    5
1.3.2  X射线衍射法    5
1.3.3硬度检测分析    6
1.3.4 金相分析    6
1.4  研究的目的意义与内容    7
1.4.1 研究的目的    7
1.4.2 研究的意义    8
1.4.3 研究内容    8
2  实验内容    10
2.1实验原料和设备    10
2.2不同工艺条件的热处理实验    13
2.2.1铝合金2024的固溶热处理实验    13
2.2.2铝合金2024不同时效温度的热处理实验    13
2.2.3铝合金2024不同时效时长的热处理实验    14
2.2.4铝合金211Z的固溶及时效热处理实验    14
2.3二次称重法实验    15
2.4硬度测试实验    17
2.4.1文氏硬度计工作原理    17
2.4.2试验过程    18
2.5 热膨胀分析相结构与尺寸变化    19
2.5.1试样制备    19
2.5.2试验过程    19
3 实验结果与讨论    20
3.1二次称重法实验数据处理与分析    20 铝合金时效处理时相变引起体积变化的测量研究:http://www.youerw.com/wuli/lunwen_34395.html
------分隔线----------------------------
推荐内容