毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

Matlab的QPSK调制解调仿真设计与研究

时间:2020-08-18 20:57来源:毕业论文
QPSK技术因其较强的抗干扰性能、良好的误码性能和较高的频谱利用率,广泛地应用于数字卫星通信系统、数字微波通信系统、宽带接入、移动通信和有线电视系统中。本文主要在介绍

摘  要: 随着数字技术的飞速发展,QPSK技术因其较强的抗干扰性能、良好的误码性能和较高的频谱利用率,广泛地应用于数字卫星通信系统、数字微波通信系统、宽带接入、移动通信和有线电视系统中。本文主要在介绍QPSK调制解调原理的基础上,分别利用MATLAB编程语言和建模仿真工具SIMULINK实现QPSK通信系统的仿真,通过观察仿真波形并结合其调制原理,分析系统性能,证明仿真模型的可行性。最后,进一步对QPSK在高斯白噪声信道中的性能进行分析,了解SIMULINK中涉及到的QPSK各种模块的功能。结果表明通过MATLAB软件实现方式,可以大大提高设计的灵敏度,节约设计时间,提高设计效率,缩小硬件电路设计的工作量。54386

毕业论文关键词:QPSK,MATLAB,仿真

Abstract: with the rapid development of digital technology, QPSK technology because of its strong anti-jamming ability, good ber performance and high spectrum efficiency, widely used in digital satellite communication system, digital microwave communication system, broadband access, mobile communication, and cable television system. This paper mainly introduces the QPSK demodulation principle, on the basis of, respectively, using the modeling and simulation tool SIMULINK of MATLAB programming language QPSK communication system simulation, by looking at the simulation waveforms and combined with its modulation principle, analysis of system performance, to prove the feasibility of the simulation model. Finally, the further performance of QPSK in white gaussian noise channel were analyzed, and the understanding of SIMULINK involved in QPSK functions of various modules. The results show that through the MATLAB software is implemented, can greatly improve the sensitivity of the design, save design time, improve the efficiency of design, to reduce the hardware circuit design work.

Keywords:QPSK,MATLAB,simulation

目录

1  前言 3

1.1  研究背景 3

1.2  通信系统的模型 3

1.3  MATLAB简介 4

1.4  本文研究的主要内容 4

2  QPSK调制与解调的基本原理 5

2.1 数字的调制与解调 5

2.2 2PSK的数字调制原理 5

2.3 QPSK调制与解调的基本原理 6

2.3.1 QPSK介绍 6

2.3.2 QPSK信号调制与解调的基本原理 7

2.4 QPSK的实际应用 9

3  QPSK调制与解调的系统仿真 10

3.1  QPSK调制与解调的Matlab仿真 10

3.2 QPSK调制的Matlab-simulink仿真 12

3.3 simulink调制的仿真结果 16

3.4 QPSK的simulink解调仿真 18

3.5 QPSK解调的仿真结果 19

3.6 仿真结果 20

结论 21

参考文献 22

致谢 23

1  前言

1.1  研究背景

当今社会已经步入信息时代,在各种信息技术中,信息的传输及通信起着支撑作用。信息化的社会,数字技术快速发展,数字器件也广泛的利用,数字信号的处理技术也越来越重要。进入20世纪以来,随着晶体管、集成电路的出现与普及、无线通信迅速发展。特别是在20世纪后半叶,随着人造地球卫星的发射,大规模集成电路、电子计算机和光导纤维等现代技术成果的问世,通信技术在不同方向都取得了巨大的成功[1]。随着技术的进步,特别是超大规模集成电路和数字信号处理技术的发展,使得复杂的电路设计得以用少量的几块即成电路模块实现,有些硬件电路的功能还可以用软件代替实现。因此使得一些较复杂的调制技术能够容易地实现并投入使用。这方面的条件使得新的更复杂的调制体制迅速地不断涌现。QPSK的调制与解调具有一系列独特的优点,已经广泛应用于无线通信中,成为现代通信中一种十分重要的调制解调方式。源'自:优尔`!论~文'网www.youerw.com Matlab的QPSK调制解调仿真设计与研究:http://www.youerw.com/tongxin/lunwen_58601.html

------分隔线----------------------------
推荐内容