毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

AT89C51单片机的数控稳压电源设计+程序+电路图

时间:2020-04-06 09:49来源:毕业论文
基于单片机的数控稳压电源具有以下特征:明确的视觉效果,精度高、可扩展性强,价格低,输出电压的特征变量

Abstract Adjustable regulated power supply is not reading the traditional simulation shows that at the time of reading is not very convenient, and in the case of use for a long time can cause the output voltage is not stable. New type of digital adjustable regulated power supply is used to compare the advanced digital display technology, the measurement results can be directly displayed, and the results of the measurement is the only, not only ensure the accuracy of the measurement results, but also in line with everyone's reading habits, greatly shortened the time reading. Simulation can be adjusted by the regulated power supply mostly adjust the resistance value of the potentiometer is used to change the desired output voltage, because the potentiometer to use for a long time is easy to wear, so after its use for a period of time can cause the result of poor contact, causes the output voltage is not accurate. And new type of digital display adjustable regulated power supply is to use the contact button to select the desired output voltage, and through digital tube can be very intuitive display output voltage, work is very stable and reliable. Numerical control regulated power supply based on MCU has the following characteristics: clear visuAl results, high precision, strong scalability, low prices, the characteristics of output voltage variable . 47540

Keywords:  voltage numerical  control single  microcomputer  AT89C51 

摘要可调稳压电源不是读数传统的模拟表明,在读数的时候不是很方便,在长期使用的情况下会导致输出电压不稳定。新型的数字可调稳压电源是用于比较先进的数字显示技术,测量结果可直接显示,测量的结果是唯一的,不仅确保测量结果的准确性,同时也符合每个人的读表习惯,大大缩短了时间来读数。模拟可调节稳压电源主要调整电位器的阻值是用来改变所需的输出电压,因为长期使用的电位器是容易磨损,所以使用一段时间后可能会导致接触不良的结果,导致输出电压不准确。新类型的数字可调稳压电源是使用按钮选择所需的输出电压,并通过数码管可以很直观的显示输出电压,工作非常稳定可靠。基于单片机的数控稳压电源具有以下特征:明确的视觉效果,精度高、可扩展性强,价格低,输出电压的特征变量。

毕业论文关键词: 稳压  数控  单片机  AT89C51 

   目 录

  1 绪论 1

1.1 数控电源背景及意义 1

1.2 设计任务与要求 2

1.3 方案论证 2

1.4 系统时钟及复位电路 2

  2 系统总体设计 3

2.1整机工作原理 3

2.2各模块设计 3

2.2.1 单片机电路 3

2.2.2 D/A转换电路 7

2.2.3 控制电路 9

2.2.4 稳压电路 10

2.2.5 整流滤波电路 12

2.2.6 显示电路 12

2.2.7 总电路 13

3 系统流程与仿真结果 15

3.1 流程图 15

3.2 仿真结果 15

4 总结与体会 18

  4.1 电路设计总结 18

4.2 心得与体会 AT89C51单片机的数控稳压电源设计+程序+电路图:http://www.youerw.com/tongxin/lunwen_49676.html

------分隔线----------------------------
推荐内容