毕业论文

打赏
当前位置: 毕业论文 > 任务书 >

乳化剂的使用对树脂防腐蚀性能的影响

时间:2022-06-03 21:59来源:毕业论文
制备不同的了水性环氧树脂乳化剂,这种乳化剂对涂料的耐腐蚀有一定的影响,本课题就是想探讨这种乳化剂对涂料的耐蚀性是否有提升,或者提升是否明显。最后通过实验发现,在不

摘要传统意义上的环氧树脂不仅仅在环境上有着很大的危害,而且它在工业上的 使用存在极大的资源浪费,所以从上世纪中旬之后就开始了对水性环氧树脂的开 发与研究。这一研究发现水性环氧树脂保留了原有的涂料性能,并在环境危害上 和资源利用上得到了很大的提升。这充分说明了水性环氧在未来的重要性,所以 本论文在于研究不同的乳化剂对其乳化后性能的影响。81242

本次论文制备不同的了水性环氧树脂乳化剂,这种乳化剂对涂料的耐腐蚀有 一定的影响,本课题就是想探讨这种乳化剂对涂料的耐蚀性是否有提升,或者提 升是否明显。最后通过实验发现,在不同分子量的聚乙二醇所制得的环氧乳化剂 的使用下,最终的涂层耐腐蚀性能是不同的,它是一个随着分子量先增后减的一 个过程。所以说乳化剂对树脂的提升的耐蚀性是有一个明显的提升的,这对将来 水性环氧树脂的耐蚀性能的发展有着很大的帮助。

毕业论文关键词:水性环氧树脂;乳化剂;聚乙二醇

Abstract In the traditional sense of the epoxy resin not only has great harm on the environment, And its use in industrial has great waste of resources, so after the middle of the last century began to research and development of waterborne epoxy resin。 The findings of waterborne epoxy resin retain the original coating performance, on the environmental and the use of resources have greatly improved 。 This fully shows the importance of the waterborne epoxy in the future, so we open this paper study the influence of the different emulsifiers on the emulsion performance。

In this paper, the preparation of waterborne epoxy resin emulsifier was different, This emulsifier has some influence on the corrosion-resistant coating, this topic is to discuss whether this emulsifier on the corrosion resistance of coating have promotions, or improve significantly。 Finally through the experiment, we found that  in polyethylene glycol (peg) of different molecular weight was prepared by using epoxy emulsifier, the final coating corrosion resistance is different, it is with a molecular weight first increase after the decreases of a process。 So emulsifier resin to enhance the corrosion resistance is a significant upgrade, which the future development of the corrosion resistance of aqueous epoxy resin has a great help。

Keywords: Waterborne Epoxy Resin; Emulsifier; Polyethylene Glycol (peg)

目 录

第一章 绪论 1

1。1  防腐蚀涂料概况 2

1。2  防腐涂料的发展过程 2

1。3  防腐蚀涂料的研究现状 3

1。4  水性环氧树脂 4

1。4。1 环氧树脂 4

1。4。2 水性环氧树脂的制备方法的比较 5

1。5  防腐涂料的涂层作用和防腐蚀机理 8

1。6  防腐蚀涂层的基本性能标准 9

1。7  乳液与乳化剂 11

1。8  课题的内容与意义 12

1。8。1 课题设计 12

1。8。2 课题意义 12

第二章 环氧乳液的防腐蚀性能研究 13

2。1  实验仪器和药剂 13

2。2  实验步骤 13

2。2。1 0。5mol/L 氢氧化钠溶液的配制 乳化剂的使用对树脂防腐蚀性能的影响:http://www.youerw.com/renwushu/lunwen_94817.html

------分隔线----------------------------
推荐内容