毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

Spheripol年产30万吨聚丙烯聚合工段工艺设计(2)

时间:2019-08-17 21:03来源:毕业论文
Polypropylene in the world at present, there are six main production process, the Spheripol liquid phase method technology, Borstar gas phase method technology, Innovene gas phase method technology, N


Polypropylene in the world at present, there are six main production process, the Spheripol liquid phase method technology, Borstar gas phase method technology, Innovene gas phase method technology, Novolen gas phase method technology, Spherizone gas phase method technology and the Unipol gas phase method technology.On the basis of comprehensive comparison, the Spheripol liquid phase technology has the advantages of wide range of products, the production of Shuangfeng product and the most mature technology.. I for the production process design optimization, such as the use of the fourth or the fifth generation with high efficiency and selectivity of Ziegler catalyst, can directly get performance close to the granulation of the spherical polypropylene granules, even without granulation can direct from the factory, specific process for catalyst preparation, raw material propylene refining, pre polymerization, polymerization, flash, degassing, steaming, drying, extrusion granulation, homogenization, packaging and warehousing. Material balance is the calculation of the material of the material in and out of the plant. It is concluded that each step of the polymer engineering is in demand and obtained. So is the heat balance.. Regarding the equipment selection, this design uses the related equipment selection strictly according to the design need, and one part of the equipment model carries on the customization. Though, the current world polypropylene by gas phase process such as Innovene, Novolen, Unipol technology has very big development potential, but because of technology import of high cost, less domestic device operating experience and product range is relatively narrow, do not accord with the purpose of this design. Sumitomo process and Horizone technology with the gas phase method technology is relatively similar, are excluded. The Hypol process, the reaction system is too complex, process design and investment is high, do not consider. Borstar process development time is shorter, can be drawn lessons from the domestic experience too little, also be to give up. Spherizone process is currently the most advanced polypropylene production process, at the same time also faces many technical problems need to conquer the contradiction.
According to produce 3 00000 tons of polypropylene polymerization process design section of the layout design of the workshop, the workshop features rectangular double workshop. Workshop size (length x width x height) is 30m x 25m x 15m. Rectangular shop easy to make the whole plant general layout, save land, convenient equipment arrangement, there are more walls provided to natural lighting and ventilation design and use. The factory’s location is according to natural geographical features, transportation conditions, water and power supply conditions, construction conditions and workers residential conditions and other principles for optimization. Working days of the design are 290 days and working hours are about 7000 hours.
This design also gives full consideration to the safety and environmental protection issues. In the production process, require that all personnel should obey strictly the regulation to operate, and usually attend the related training to know about the relevant information. In the environment protection part, wastewater and noise should be ejected with strict requirement.
This design by the teacher Xu Chunhua, in the whole process design process many teachers made a lot of valuable comments, in this express heartfelt thanks. Through the whole design process of the system training, so I have a comprehensive understanding of the production process and application of polypropylene, which will lay the foundation for the future work.. The polypropylene polymerization process design section of a wide range of knowledge, and my limited knowledge and experience of, design errors and inappropriate, ask examines teacher criticism and corrections.
Key:Polypropylene; Spheripol liquid phase method technology; Material balance; Heat balance
目  录 Spheripol年产30万吨聚丙烯聚合工段工艺设计(2):http://www.youerw.com/huaxue/lunwen_37624.html
------分隔线----------------------------
推荐内容