注塑成型塑料部件设计英文文献和翻译(10)

process.
Acknowledgement This project was supported by the Academic Research
Fund, Ministry of Education, Singapore, and Moldﬂow Corporation.
References
1. Malloy RA (1994) Plastic part design for injection moulding: an intro-
duction. Hanser Publishers, Munich
2. Sahu K, Grosse IR (1994) Concurrent iterative design and the integra-
tion of ﬁnite element analysis results. Eng Comput 10:245–257
3. Irani RK, Kim BH, Dixon JR (1995) Towards automated design of the
feed system of injection moulds by integrating CAE, iterative redesign
and features. J Eng Ind 117:72–77
4. Lee R-S, Chen Y-M, Lee C-Z (1997) Development of a concurrent
mould design system: a knowledge-based approach. Comput Integ
Manuf Sys 10(4):287–307
5. Lu SC, Rebello AB, Miller RA, Kinzel GL, Yagel R (1997) A sim-
ple visualization tool to support concurrent engineering design. Comput
Aided Des 29(10):727–735
6. Lee BH, Kim BH (1995) Automated selection of gate location based
on desired quality of injection moulded part. SPE Annual Technical
Conference, pp 554–560
7. Pandelidis I, Zou Q (1990) Optimisation of injection moulding design.
Part 1: gate location optimisation. Polym Eng Sci 30(15):873–882
8. Pandelidis I, Zou Q (1990) Optimisation of injection moulding design.
Part 2:moulding conditions optimisation. PolymEng Sci 30(15):883–892
9. Lam YC, Seow LW (2000) Cavity balance for plastic injection mould-
ing. Polym Eng Sci 40(6):1273–1280
10. Lee BH, Kim BH (1996) Optimisation of part wall thickness to re-
duce warpage in injection moulded part based on the modiﬁed complex
method. SPE Annual Technical Conference, pp 692–697
11. Francois V, Cuilliere JC (2000) 3D automatic remeshing applied to
model modiﬁcation. Comput Aided Des 32:433–444
12. Lam YC, Manickarajah D, Bertolini A (2000) Performance characteris-
tics of resizing algorithms for thickness optimisation of plate structures.
Finite Elem Anal Des 34:159-174
13. Deng Y-M, Britton GA, Lam YC, Tor SB, Ma YS (2002) A feature-
based CAD-CAE integration model for injection moulded product de-
sign. Int J Prod Res 40(15):3737–3750
14. Deng Y-M, Lam YC, Tor SB, Britton GA (2002) A CAD-CAE inte-
grated injection moulding design system. Eng Comput 18(1):80–92
15. Britton GA, Lam YC, Deng Y-M (2002) Speciﬁcation model: a ﬁrst
step towards automatic interpretation of injection moulding CAE re-
sults. Int J Adv Manuf Technol 20(11):833–843
16. Moldﬂow Pty. Ltd. (1999) Moldﬂow Plastic Insight Release 1.1 Online
Documentation注塑成型塑料部件设计中的自动形状修改

摘要：注塑模制塑料零件的设计必须确保该零件可以被制造成在注塑过程中的所需的质量级别。仿真软件已被广泛地应用于工业，以评估模塑性和质量的度量标准。但是，它可以直接用于改善式样。设计上的修改，必须由设计者进行评估仿真结果后进行。基于作者先前的关于注塑CAD-CAE一体化方面的工作，本文探讨了自动零件形状修改的策略和方法，以达到所需的零件质量。增强的CAD-CAE一体化模式开发。该模型用于指定形状修改变量，以及模塑性和其它质量的测量标准。形状修改变量包括每个个体特征的位置和尺寸参数，以及相关的零件特征，如零件厚度。有了这些信息，一个反复的零件形状的仿真子程序修改和执行的过程将会自动进行，并将结果进行了验证和评估。根据指定的条件优化的形状可以来自于评价结果。软件样机已经研制成功。一个设计案例经过分析可说明和论证完善的策略和方法的实用性。

关键词：注塑，塑料零件设计，形状修改注塑成型塑料部件设计英文文献和翻译(10):http://www.youerw.com/fanyi/lunwen_759.html