毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

PLC工厂恒压供水系统设计+程序图

时间:2020-12-09 17:34来源:毕业论文
基于PLC的变频调速恒压自动控制供水系统。变频调速恒压供水自动控制系统由可编程控制器、变频器、水泵电机组、压力传感器及控制柜等组成。系统采用一开一备的方式

摘 要:本文结合工厂的用水现状,设计了一套基于PLC的变频调速恒压自动控制供水系统。变频调速恒压供水自动控制系统由可编程控制器、变频器、水泵电机组、压力传感器及控制柜等组成。系统采用一开一备的方式,一台变频器控制一台主电机的启动、运行与调速,另一台备用电机在主电机功率不够时工频投入使用。异步电动机驱动水泵旋转来供水,通过变频器调节异步电机的转速,从而改变水泵的出水流量而实现恒压供水的。因此,恒压供水系统的实质是通过改变异步电动机定子供电频率来改变同步转速而实现无极调速。60650

毕业论文关键词:PLC,变频器,恒压供水

Abstract: Combining with the plant water status, design a set of based on PLC automatic control frequency conversion velocity modulation constant pressure water supply system. Frequency conversion velocity modulation constant pressure water supply automatic control system by PLC, frequency converter, water pump unit, pressure sensor and control cabinet, etc. System with the method of a open a case, a frequency converter to control a main motor start-up, operation and control of motor speed, the other a spare motor in the main motor power is not enough power frequency when put into use. Asynchronous motor driven pump rotation to water supply, adjust the speed of induction motor, by the frequency converter to change the pump out of the water flow and realize the constant pressure water supply. Therefore, the essence of constant pressure water supply system is by changing the asynchronous motor stator power supply frequency to change the synchronous speed and realize the infinite speed. 

Keywords :PLC,inverter ,constant pressure water supply 

1 绪论 4

1.1变频恒压供水产生的背景和意义 4

1.2 恒压供水系统的国内外研究现状 4

1.3 本课题的主要工作 5

2.1 供水系统的基本特性 6

2.2 变频与变压(VVVF)原理 6

2.3 变频调速的原理 7

2.4 水泵调速运行的节能原理 9

2.5 变频恒压供水的特点 10

3 变频恒压供水系统的硬件设计 11

3.1 变频恒压供水系统方案设计 11

3.2 变频恒压供水系统结构设计 12

3.4 基于S7-200 PLC恒压供水系统设计 20

4 变频恒压供水系统软件设计 24

4.1 恒压供水系统的控制流程 24

4.2 供水系统加减水泵分析 25

4.3 恒压供水中PID控制设计 25

4.4 控制系统程序设计 26

4.5组态王监控画面设计 30

4.6控制系统的调试 31

结   论 33

参考文献 34

致   谢 35

1 绪论

1.1变频恒压供水产生的背景和意义

我国长期以来在市政供水、高层建筑供水、工业生产循环供水等方面的技术一直比较落后,工业自动化层度低。主要表现在用水高峰期,水的供给量常常低于供求量,出现水压降低供应不求的现象;而在用水低峰期,水的供给量常常高于供求量,出现水压升高供过于求的情况,此时会造成能量的浪费,同时还可能造成水管爆裂和用水设备的损坏。传统调节供水压力的方式,多采用频繁启/停电机和水塔、蓄水池的二次供水调节的方式,前者会产生大量能耗,而且对电网中其他负荷造成影响,设备不断的启停也会影响设备的寿命;后者则需要大量的占地与投资。同时,二次供水也不能保证供水质的安全与可靠。而变频调速式的运行十分稳定可靠,无需频繁的启停,设备运行十分平稳,避免了电气、机械冲击,也没有水塔、蓄水池供水带来的二次污染的危险。 PLC工厂恒压供水系统设计+程序图:http://www.youerw.com/zidonghua/lunwen_66165.html

------分隔线----------------------------
推荐内容