毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

STC89C51单片机的智能温控风扇设计+PCB电路图

时间:2019-01-13 14:46来源:毕业论文
利用STC89C51单片机为核心控制的系统,根据传感器DS18B20采集的温度和PWM转速原理,对风扇进行转速的调整与控制。用户可以设置上、下限温度值,实时温度低于下限值时风扇不转

基于单片机的智能温控风扇设计摘  要:风扇是人们日常生活中常见的物品。随着科技的迅猛发展和生活的需要,智能温度控制的风扇应运而生。本设计就是利用STC89C51单片机为核心控制的系统,根据传感器DS18B20采集的温度和PWM转速原理,对风扇进行转速的调整与控制。用户可以设置上、下限温度值,实时温度低于下限值时风扇不转,高于上限值时全速转动,处于中间值时弱风转动。并且能够将设定的上下限值保存在DS18B20内的E2ROM里,具备掉电保存功能。使用方便,性能稳定。32676
毕业论文关键词:STC89C51 DS18B20 风扇 智能温控
 Intelligent Temperature Control Fan Design Based On SCM
Abstract:The fan is common in daily life items today. With the rapid development of science and technology, intelligent temperature control fan emerged. This design used STC89C51 micro-controller as the core control system, and according to the temperature collection of DS18B20 and principle of PWM speed sensor to adjust and control the fan speed. Users can set the highest and lowest temperature. When real-time temperature is below the lower limit, the fan does not turn. It works at full rotation when the temperature higher than the upper limit, and the fun works at low wind rotation in the middle of value. The upper and lower limits are able to be stored in the DS18B20 E2ROM, and it is also can be saved when the power is off. The performance of the fan is stable and the operation of this fan is simple.
Keywords: STC89C51   DS18B20   Fan Intelligent Temperature Control
目录
1 绪论    1
2方案设计    2
2.1 系统基本设计    2
2.2方案论证    2
2.2.1温度传感器的选择    2
2.2.2控制核心的选用    3
2.2.3显示电路    3
2.2.4调速方式    4
3硬件设计    5
3.1系统器件简介    5
3.1.1 温度传感器简介    5
3.1.2 DS18B20的内部组成    5
3.1.3 STC89C51简介    6
3.1.4 单片机最小系统    8
3.2电路设计    9
3.2.1温度传感器电路    9
3.2.2独立按键设计    10
3.2.3数码管显示电路    11
4软件设计    12
4.1主程序    12
4.2 Keil C51编写程序    12
4.3 用Proteus进行仿真    13
5系统调试    15
5.1 软件调试    15
5.1.1 按键程序调试    15
5.1.2 DS18B20检测温度调试    15
5.2硬件调试    16
5.2.1按键电路的调试    16
5.2.2温度传感器的电路调试    16
5.2.3电机的电路调试    16
6结论    17
致 谢    18
参考文献    19
附录1 原理图    20
附录2 PCB版图    21
1 绪论
当今社会,风扇被广泛的应用在各个领域,且发挥着重要的作用,比如夏天人们使用的家用电风扇、笔记本电脑上的CPU风扇、工厂大型机械中的散热风扇等。虽然空调已经逐渐成为主流的降温电器,但是电风扇的低价环保还是很受市场欢迎的。随着经济的发展和科技的进步,智能化、自动化已经成为一种趋势,市场上的智能风扇也相继越来越多,功能也越来越全面完善[1-3]。
单片机具有高智能化、高控制度、易操作、低价、强抗干扰能力等的优点,许多跟温度有关的物品都采用了单片机。根据环境温度的变化,来调节风扇的转速大小和开关,从而实现了对风扇的智能温度控制。这种智能化的设计能够给人们生活和生产提供很多的方便和好处,大大提升了人们的生活质量、生产效率,同时节约了资源[4-6]。 STC89C51单片机的智能温控风扇设计+PCB电路图:http://www.youerw.com/zidonghua/lunwen_29399.html
------分隔线----------------------------
推荐内容