毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C52单片机温度检测及报警系统设计+源代码

时间:2017-02-09 11:33来源:毕业论文
AT89C52单片机温度检测及报警系统设计,源代码,流程图,实物图,温度信号由DS18B20温度传感器进行采集,LCD1602显示器

摘要:本设计是基于AT89C52为核心的单片机温度控制系统。整个系统由温度采集系统、单片机控制系统、显示与报警系统组成。首先温度信号由DS18B20温度传感器进行采集,多个温度传感节点通过单总线与单片机相联形成分布式系统。然后经过转换成数字信号后传入单片机,由单片机对数字信号进行相应的处理,设定温度报警上下限,然后在1602液晶屏上显示实时温度。当温度超出所设定的值时,报警器开始报警,从而实现远程对整个温度的实时管理和控制。这种分布式温度测量系统具有成本低廉、传感精度高、系统稳定、易于管理等特点。5627
关键词: 温度报警;单片机AT89C52 ;温度传感器DS18B20 ;LCD1602显示器
SCM temperature detection and alarm system design
Abstract: The design of temperature control system based on AT89C52 as the core. The whole system consists of temperature acquisition system, SCM control system, display and warning system. First, temperature signal acquisition by DS18B20 temperature sensor, a temperature sensor nodes by single bus connected with the SCM formation of distributed system. Then after converted into digital signal and then into the microcontroller, digital signal corresponding to the processing by the MCU,set temperature alarm limits, and then display the real-time temperature in the 1602 LCD screen. When the temperature exceeds the set value, the alarm alarm, so as to realize the real-time control and management of the whole temperature range. This kind of distributed temperature measurement system has the advantages of low cost, high sensing precision, stability, easy management features.
KeyWords: Temperature alarm;SCM AT89C52 ;Temperature sensor DS18B20 LCD1602 display
目录
1绪论    1
1.1选题的目的    1
1.2选题的背景    1
1.3课题研究内容及要求    1
2设计原理及方案选择    3
2.1温度测量原理    3
2.1.1热电偶的测温原理    3
2.1.2热电阻测温    3
2.1.3非接触式测温仪表    3
2.2本设计方案选择    4
3硬件电路设计    6
3.1 系统方框图    6
3.2单片机的概述    7
3.2.1单片机的研究现状    7
3.3.2MCS-51 单片机简介    8
3.3.3MCS-51 单片机特点及应用    8
3.3单元电路    10
3.3.1核心控制器件AT89C52    10
3.3.2 DS18B20内部结构及工作原理    12
3.3.3 LCD1602内部结构及工作原理    19
3.3.4报警电路    21
4单片机软件设计    22
4.1软件设计总体思想    22
4.2测温模块    22
4.2.1温度的采集    23
4.2.2温度的测量    24
4.3显示报警模块    25
5结论    27
致谢    28
参考文献    29
附录    30
 
1绪论
1.1选题的目的
这次毕业设计选题的目的主要是让生活在信息时代的我们,将所学知识应用于生产生活当中,掌握系统总体设计的流程,方案的论证,选择,实施与完善。通过对温度检测与报警系统的设计制作。了解温度采集温度检测的全过程,提高在电子工程设计和实际操作方面的综合能力,初步培养在完成工程项目中所应具备的基本素质和要求。培养研发能力,通过对电子电路的设计,初步掌握在给定条件和要求的情况下,如何达到以最经济实用的方法、巧妙合理地去设计工程系统中的某一部分电路,并将其连接到系统中去。提高查阅资料、语言表达能力和理论联系实际的技能。 AT89C52单片机温度检测及报警系统设计+源代码:http://www.youerw.com/zidonghua/lunwen_2722.html
------分隔线----------------------------
推荐内容