毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

AT89S51单片机射频识别阅读器的设计

时间:2021-04-25 21:43来源:毕业论文
了解AT89S51和射频收发器CC1100的性能、参数和工作原理,熟悉各器件特点,利用DXP2004设计射频阅读器的总体电路框图,设计阅读器核心电路的电原理图。同时对AT89S51单片机进行编程设计

摘要无线射频识别技术(RFID)作为本世纪最有发展前途的信息技术之一,已得到全球业界的高度重视。它利用射频方式进行非接触双向通信,以此达到自动识别目标对象并获取相关数据,具有精度高、适应环境能力强、抗干扰强、操作快捷等许多优点。66374

本文介绍了RFID的概念、发展历程、ISO技术标准和EPC Global技术标准。同时了解了阅读器的结构组成、工作原理以及相关功能等知识以及设计中的难点。

本课题研究的问题是运用AT89S51和射频收发器CC1100,设计一种简单价廉的射频阅读器。具体地,设计阅读器的总体电路框图,设计阅读器的主体部分电原理图,给出程序流程图,并对单片机进行编程设计,完成部分功能。

本文通过了解AT89S51和射频收发器CC1100的性能、参数和工作原理,熟悉各器件特点,利用DXP2004设计射频阅读器的总体电路框图,设计阅读器核心电路的电原理图。同时对AT89S51单片机进行编程设计,完成对收发器CC1100的控制和数据传输的编程设计与仿真。对设计的阅读器整体性能进行分析并提出改进意见。

毕业论文关键词:RFID;AT89S51; CCll00; 阅读器

Title  Design of RFID reader                                                       

Abstract

Radio Frequency Identification(RFID),as this century’s most promising

information technologies,has been attached great importance to the global industry.RFID represents a noncontact method for data transfer in object identification, has the advantages of high accuracy and ability to adapt to the environment, strong anti-jamming,fast operation and so on.

This article describes the meaning of the RFID,the development process of the RFID,ISO technical standards and technical standards for EPC Global. At the same time, the composition, reader structure working principle and related functions etc. knowledge and the design of the difficulties.

The research problem has designed a simple and inexpensive RFreader, using AT89S51 and radio frequency transceiver CC1100.Specifically, the overall circuit diagram design reader, reader's main part design circuit diagram, the program flow chart is given, and programming the microcontroller, to complete some functions.

In this paper, through the understanding of performance parameters and working principle of AT89S51 and RF transceiver CC1100, familiar with the characteristics of each device, using the general circuit diagram of DXP2004 design of RF reader, schematic design reader core circuit. At the same time, programming the AT89S51 chip, the design and Simulation of programming control and data transmission of the CC1100 transceiver.

Analysis on the overall performance of the reader and suggestions for improvement

Keywords:RFID; AT89S51;CC1100;Reader

目   次

1  概述1

1.1  选题意义1

1.2  RFID简介1

1.3  阅读器的概述2

1.4  本文主要研究工作及论文的主要功能4

2  阅读器工作原理4

2.1  阅读器工作原理4

2.2  相关标准6

3  RFID阅读器电路设计8

3.1  RFID阅读器电路总体框图8

3.2  RFID阅读器电路原理图11

3.3  电路仿真验证12

4  RFID阅读器软件设计14

4.1  配置CC110014

4.2  串行口通信程序18

4.3  阅读器与标签通信19

4.4  标签与阅读器通信21

4.5  标签命令22

4.6  阅读器访问标签步骤23 AT89S51单片机射频识别阅读器的设计:http://www.youerw.com/tongxin/lunwen_74299.html

------分隔线----------------------------
推荐内容