毕业论文

当前位置: 毕业论文 > 机械论文 >

SolidWorks柔性张力释放绞车关键技术研究+CAD图纸

时间:2020-06-13 10:35来源:毕业论文
会造成缆绳间的相对滑动,导致缆绳的使用寿命降低,甚至会对缆绳造成损坏。本论文提出一种新型电控电缆绞车方案。并对其关键部件进行校核计算,其具有重要的实际工程意义
打赏

摘要在工业生产过程中,绞车作为常见的起重拖曳机械被广泛地应用在建筑业、矿业、水利工程、海洋石油等各种领域。绞车在有些工况下速度易受干扰、负载变化频繁以及由于卷筒上各层缆绳的张力不同,有时会外层紧内层松,会造成缆绳间的相对滑动,导致缆绳的使用寿命降低,甚至会对缆绳造成损坏。本论文提出一种新型电控电缆绞车方案。并对其关键部件进行校核计算,其具有重要的实际工程意义。50743

第一章主要阐述了本次课题的研究背景、研究目的以及研究本次课题所具有的意义。

第二章系统地介绍了绞车。

第三章为总体方案的设计,并且简单地计算了核心部分的几何位置关系。

第四章主要阐述了电控电缆绞车的参数计算。

第五章主要为电控电缆绞车张力释放机构的关键部件的强度计算。

第六章总结全文。

毕业论文关键词:绞车、机构设计、柔性减张力

Abstract

In the process of industrial production, as one of the most common lifting winch towing machine is widely used in construction, mining, water conservancy, offshore oil etc.. Winch speed vulnerable to interference, frequent load changes due to the drum and the cable tension is different in some cases, sometimes the tight inner loose, will cause the relative sliding between the cable, reduces the service life of the cable, and even can cause damage to the cable. This thesis put forward a new type electric cable winch scheme. And carries on the checking calculation of its key component, which has important practical engineering significance.

The first chapter mainly expounds the significance of this topic research background, research purpose and Research on this topic has.

The second chapter introduces the winch.

The third chapter is the design of overall scheme, and simple to calculate the geometric relation of core part.

The fourth chapter mainly elaborates the parameters of electric cable winch calculation.

The fifth chapter is the calculation of key components of electric cable winch tension release mechanism of strength.

The sixth chapter summarizes the full text.

 Key words: winch, organization design, reduce tension

目 录

第一章 绪论 1

1.1 研究背景 1

1.2 研究目的和意义 1

第二章 绞车的介绍 3

2.1 绞车的发展历史 3

2.2 绞车的应用 3

2.3 绞车的分类和构成 4

2.3.1  绞车的分类 4

2.3.2  绞车的构成 5

2.3 绞车排缆方法简介 6

第三章  总体方案的设计 8

3.1 电动电缆绞车排缆机构的构成 8

3.2 电动电缆绞车系统张力控制装置 8

3.3 柔性张力释放机构的设计 9

第四章  电控电缆绞车参数计算 13

4.1 工作方式分析和设计原则 13

4.2 系统的驱动控制原理 13

4.3 重要部件的参数计算及选取 14

4.3.1.动力驱动的选取及功率测算 14

4.3.2.传动机构 SolidWorks柔性张力释放绞车关键技术研究+CAD图纸:http://www.youerw.com/jixie/lunwen_54138.html

------分隔线----------------------------
推荐内容